Ratings submitted by customers like you who bought this part.
?
$24.22
In Stock
Fix Number:
FIX3530485
Manufacturer #:
6931EL3003D
Manufactured by:
LG
Works With Model DLE1101W!
Product Description
If your dryer is not turning on, or not heating up, there could be an issue with your thermal fuse. This OEM fuse is designed to act as a high-limit thermostat, and will turn off the heating element in your dryer if the appliance overheats. It does this by cutting off power to the dryer. If the fuse has blown, it will need to be replaced as they cannot be reset. You can test the fuse with a multimeter, and should receive a reading of 0 ohms of resistance if the fuse is still good. A common reason for a dryer to overheat is if the air vents are blocked, as the hot air is contained in the dryer causing the fuse to blow. Be sure to keep your dryer filter and vents clean of lint and other debris to prevent this from happening.
If your dryer is not turning on, or not heating up, there could be an issue with your thermal fuse. This OEM fuse is designed to act as a high-limit thermostat, and will turn off the heating element in your dryer if the appliance overheats. It does this by cutting off power to the dryer. If the fuse has blown, it will need to be replaced as they cannot be reset. You can test the fuse with a multimeter, and should receive a reading of 0 ohms of resistance if the fuse is still good. A common reason for a dryer to overheat is if the air vents are blocked, as the hot air is contained in the dryer causing the fuse to blow. Be sure to keep your dryer filter and vents clean of lint and other debris to prevent this from happening.
Works with the following brands:
LG, Kenmore, General Electric
Works with the following products:
Dryer, Washer Dryer Combo, Washer
Fixes the following symptoms:
Not Heating
Part# 6931EL3003D replaces these:
AP4440975, 6931EL3003D
Videos For installing this part.
Replacing your Thermal Fuse
Replacing your Thermal Fuse
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
February 9, 2022
1. My dryer has power but will not start.
2. I can hear a click when I press the (play/pause) START button.
3. I did clean the duct work in the wall all the way to the roof HEAVY LINT.
4. Lastly, disassembly video would be a help.
Any advice greatly appreciated.
Thanks very much.
For model number DLEX4270V
Hello James, thank you for your question. There could be a few reasons why your dryer will not start. The dryer won't start if the door switch senses that the door is open. To test your door switch, set your multimeter to the lowest position for ohms of resistance. Touch the black meter probe to one metal prong on the switch and the red probe to the other. Press in on the switch pole. If the meter doesn't change, the switch is bad and needs to be replaced. Part number FIX3529308. It could also be the push to start button, part number FIX11708666 or the timer part number FIX11710909. We hope this helps. Unfortunately, we do not have a video. Good luck with your repair!
This genuine OEM sensor is also known as a moisture sensor or a humidity sensor. It is found underneath the lint filter in your dryer, and is used to detect the amount of moisture present in the drum. This is to prevent ...
The high limit thermostat on your dyer prevents your dryer from overheating. When the dryer heats up too much, the high limit thermostat will sense it and automatically shut off the heating element. If the thermostat is ...
This is a genuine OEM thermistor with a wire harness included. The thermistor is a temperature sensor that helps to monitor and regulate the temperature inside your dryer. Some signs that you may need to replace this par...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Removed screw holding vent tube, pulled vent tube out. The thermal fuse and thermostat assy are left of inside the hole on the back of the dryer where the vent tube came out. The screws are easy to take out with one hand using a phillips screwdriver. I had to use a long screwdriver because the drum was in the way with a shorter one. The s
... Read morecrews were pretty tight, so use a phillips with a good point, dont want to strip the screws. Because i can only get one hand in there, it was a little tricky getting the new parts lined up and starting the first screws at the same time, that took a little while but I finally got them started. If i couldnt get the first screws started i was goint to cut the bottom holes on the brackets for the parts, start the screw, slip the bracket onto the screw and then start the second screws. I used a magnetic flashlight inside the dryer, could put it in different places to see better in there. I should have put a few layers of masking tape arround the vent hole edge, its pretty sharp and when i was done i realised i had cut my arm on that edge. Dryer works again and dear Wife is happy.. I did test the old parts, thermal fuse was blown, probably because of too much lint in the flexable dryer hose, i shoulda replaced the dryer hose sooner.
At first, I could not find a video on an older model dryer with controls on the back. Once I watched a video (on youtube) that showed a dryer with controls on the back (not an LG), I figured out how to get where I needed. The diagrams on the website showed me where I needed to find my part (thermostat) and from there it was easy. I sta
... Read morerted with the troubleshooting comments (least expensive first, obviously) and if that didn't work, I would work my way up to replacing the entire heating element. Once I put the part in and put it all back together, it is running more quietly and drying just like it used to. One small investment ($4.61 plus shipping) , an afternoon repairing myself, and I saved a TON of money (in repairman coming or purchasing a new dryer)!! Thanks for supplying troubleshooting help AND video support . Will definitely use this site from now on !
Check it out on You Tube and then proceed. Although the parts were very small and inexpensive there was much sheet metal to remove to get at them. This actually afforded and good opportunity to thoroughly clean the rollers and vacuum all the accumulated lint.
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(4 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
4
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ron B - October 21, 2021
Verified Purchase
Perfect fit
I am going to tell the truth on this one. I took this part number to Amazon to see if they had it cheaper. They did. All numbers match. Part number model number everything. Showed up two days later and, you guessed it wrong part. Happened with two parts. Order from “Fix” and bam good part and fixed the issue with the dryer. Thank you.
★★★★★
★★★★★
David M - September 24, 2021
Verified Purchase
Easy fix
Easy order.
Prompt shipment.
Cost was considerably less than a service call.
Ain’t Youtube the best?
★★★★★
★★★★★
David G - February 10, 2020
Verified Purchase
Great service and reasonably priced Parts
I ordered my parts late in the evening and in a couple of days i had the Correct parts in my hand, so i have a good opinion of this company.
★★★★★
★★★★★
Joseph A - May 31, 2019
Verified Purchase
works,duh
it works, duh, kinda like the reason I bought it?
Model Compatibility
This part works with the following models:
Fix Number: FIX3530485
Manufacturer Part Number: 6931EL3003D
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.