With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenheit. Differential of 60 degrees.
Works with the following brands:
Kenmore, Whirlpool, Roper, KitchenAid
Works with the following products:
Dryer, Washer Dryer Combo
Fixes the following symptoms:
Too hot
Part# WP3390291 replaces these:
AP6008306, 3390291, 696397
Works with the following brands:
Kenmore, Whirlpool, Roper, KitchenAid
Works with the following products
Dryer, Washer Dryer Combo
Fixes the following symptoms
Too hot
Part Number Cross Reference
Part# WP3390291 replaces these:
AP6008306, 3390291, 696397
Videos For installing this part.
Replacing your High Limit Thermostat
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jesse
March 17, 2022
My dryer doesn't turn off in Automatic mode even though the clothes are dry. Is this the part I need to fix it?
For model number LE5200XTW1
Hello Jesse, Thank you for the question. We suggest testing the Dryer Cycling Thermostat. You will find this part attached to the blower wheel housing. With a multimeter you can test the two large terminals on the thermostat, they should read closed for continuity and the two small ones should show an ohms resistance value. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
The dryer thermal fuse, also sometimes referred to as the thermal cut off or temperature fuse, is a 2 by 1/2-inch, white, plastic safety mechanism that halts the flow of electricity to the motor circuit when a dryer over...
This thermostat is an OEM replacement part for a dryer. It is sold individually. It measures approximately 2-inches by 1.5-inches, is black and silver, and constructed of plastic and metal material. You will find this pa...
This genuine OEM kit includes a high limit thermostat and a thermal cut-off fuse for your dryer. The thermostat has a limit of 250 degrees Fahrenheit, and the fuse has a limit of 360 degrees Fahrenheit. The purpose of th...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
first I disconnected the power from the dryer removed it from the wall. then I removed the ducking... Pulled rear panel, was real easy found all bolts holding it on on outside edges. Once panel was off was easy to locate heating element and thermostat was in element was 4 bolts holding element to ducking, I disconnected the two wires to t
... Read morehe element in the two wires to the thermostat and marked where they went.I replaced both parts and re-assembled as I took it apart
removed the front lower panel with screw driver 1 min/ removed the three thermostats (easily identifiable/ first removed shield for heating coil for better access 10 min/ inspected connectors for looseness and tightened some/2 min/installed new thermostats paying attention to orientation 15 min/ test run for hot heat 2 min/ replaced front
... Read more panel and moved dryer back in place 5 min
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11741441
Manufacturer Part Number: WP3390291
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.