This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Works with the following brands:
General Electric, Hotpoint
Works with the following products:
Dryer
Part# WE04X20415 replaces these:
AP5805477, WE04X20415-20PK, WE4M355, WE4M357
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
December 12, 2021
Part WE4M357 (TIMER) has been superseded to Part WE04X20415
But the new part does not have terminal F for the white wire.
Where would the white wire go then?
For model number GTDX100GM2WW
Hello Peter, Thank you for your inquiry. We have included a link to our video on how to install a similar timer. We have also found the following wiring instructions: on the timer you'll want to connect yellow to X, white to T, red to B, orange to A and brown to C. The 6th wiring is a ground wire and is no longer used. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related PartsAdditional or alternate parts to consider.
This clip fits inside the control knobs for your laundry machines, and helps to securely fasten the knob to the shaft, which allows you to easily turn the knob to select the correct settings. This is a genuine OEM part t...
If your current timer knob has become cracked or otherwise damaged, this is the replacement part you will need. This knob is meant for D-shaped shafts only. The timer knob allows you to select the amount of time your dry...
$18.91
In Stock
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 4.9 / 5.0, 8 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
When rotating timer to select cycle, It didn't feel right.
Replaced the timer but that wasn't the problem. It was the timer knob. After examining the timer knob,I went and bought a new one,and fixed the problem. Please replace the knob first before replacing the timer. It takes 10 seconds to replace the knob.
Unscrewed the front panel, twisted off the timer and using the pliers I disconnected the wires one at a time while simultaneously connecting the wire to the new timer. Placed the new timer on the panel with a simple twist. Replaced panel and screws. Placed on new timer knob. Wahla! Received my parts in 2 days and it took me less than 15 minutes total time to do
Easy,remove back of control panel with Phillips screwdriver, remove the timer knob may need a flat screwdriver to do this, now the timer can be removed from the back of front panel just twist and pull the timer out plenty of slack wire, remove blade connections one at a time (may need pliers) and install on new timer at same location, when complete re-install timer as you removed it by twisting it into place,install back panel, on the stem of old timer or still inside the knob you will see a metal piece you need this piece as the stem is too small without it.
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX9491767
Manufacturer Part Number: WE04X20415
