Part Location Diagram of WE1M504 GE Drum Bearing Slide - White (Sold individually)
See part 316 in the diagram
Replacing your General Electric Dryer Drum Bearing Slide - White (Sold individually)
( Grid squares measure 1x1 inch )

Drum Bearing Slide - White (Sold individually)

★★★★★
★★★★★
1 Review

Rated by 44 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$18.58
In Stock
Fix Number:
FIX755842
Manufacturer #:
WE1M504
Manufactured by:
GE

Product Description

This single drum bearing slide attaches to the outer-most side of the bearing. This part is also sometimes referred to as a drum slide, drum glide, or drum pad. It provides support to the front of the drum as it rotates. They are approximately 3-inches long, 1 inch wide and made from a durable white plastic. If your appliance starts making unusual sounds, is not drying clothes properly, or leaves marks on clothes, it may be time to replace this part. The dryer has 2 slides, which we recommend replacing at the same time, as they tend to wear out at the same rate. You will need to order 2 of this part to replace both drum bearing slides, since it is sold individually. Before you begin this repair, be sure to disconnect the power to the dryer.

Videos For installing this part.

Replacing your Drum Bearing Slide - White (Sold individually)

Replacing your Drum Bearing Slide - White (Sold individually)

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chuck
July 29, 2022
11 YEAR OLD DRYER. Has power to dryer, vent clear, power lights up console, BUT will not start drum nor heat up. How to diagnose what issue is? Considering newer model depending upon diagnosis.
For model number DV220AEW/XAA 01
Fix.com logo
Hello Chuck, thank you for your questions. We recommend replacing the Drive Belt FIX4133825 to correct the issue of the drum not turning. And for the no heat issue we advise that the Thermistor FIX4204984 may need to be replaced. We have a videos for both for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 44 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Donald L. from Belmont, MA
Parts Used:
WE09X27634, WE1M1067, WE3M26, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Dark marks on clothing; clothing sticking between drum and front panel
Others with the same problem of dark marks on clothing suggested replacing the white and the grey drum slides that slip into the front drum bearing unit. When I open up the dryer, I did find that both the white and grey drum slides on one side of the front drum bearing piece had completely worn away, and some of the drum bearing piece wa s also worn away. I had decided in advance to order both white slides, both grey slides, a new felt seal, and the front drum bearing piece. Possibly I could have reused the old front drum bearing, but the replacement was cheap enough. Three bits of advice: 1) if you replace the felt seal, make sure you get it tucked behind the clips on the door panel; 2) if you replace the front drum bearing piece, once you have the dryer put back together, reach up and pull the plastic drum bearing toward you to be sure it is fully snapped into place; 3) after you replace the slides or felt, the drum will make mild rubbing noises as it turns, so run the dryer with no heat for about 30 minutes to seat the parts.
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nae from BRENTWOOD, TN
Parts Used:
WE09X27634, WE03X29897, WE05X20431, WE3M26, WE1M504, WE2M96, WE12X83
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The dry was making a whining sound. Very loud.
I followed all the video on the website with all the parts I had purchased. Very easy. Just make sure you unplug the dryer first. Thank you,
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Schertz, TX
Parts Used:
WE09X27634, WE1M1067, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
screeching and catching on to clothes
Followed video instructions. Piece of cake. Thank you!
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Vincent from Apopka, FL
Parts Used:
WE09X27634, WE1M1067, WE3M26, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Takes A Long Time To Dry
Followed the video that was provided on the web site
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
VINCENT FLYNN from FARMINGTON, NH
Parts Used:
WE09X27634, WE1M1067, WE3M26, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Squeeking
Followed the video instructions provided by this site No confusing, hard to decipher diagrams or written instructions. The whole process took 30 minutes half of which was cleaning out 5 years of accumulated lint.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald from Mokena, IL
Parts Used:
WE1M1067, WE1M504, WE04X25996
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Igniter failure.
First remove top, two screws just above door when opened. Remove a couple screws holding front to sides and remove front to expose drum bearing slides, mine weren't bad but since I was this far to get to the burner assy, why not replace them. Now the more difficult part - getting to the igniter. It is impossible to get to the igniter wi thout removing the side wall but on my unit there is/was a 4" knock-out in the side wall of the dryer to access or at least see the burner assy. I put the new slides in and replaced the front and top. Then took tin snips and cut a big flap and then opened the side to access the igniter. Now I was able to reach in and easily change the igniter, I then bent the side wall I had cut back into place and with a piece of sheet metal and some mini screws. Now I still had that knock out open so I could see if the new igniter worked and within seconds I had a fire and the dryer was repaired. replace the knock out so that no debris can get into the housing near the fire box.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeff from GLENDALE, AZ
Parts Used:
WE09X27634, WE1M1067, WE3M26, WE1M504
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Loud squeaky noise
Philiphs screws driver and watched a how to video
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christine from Nantucket, MA
Parts Used:
WE03X29897, WE1M504
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
worn drive belt & drum bearing slidesslides
My advice is to watch the instruction video from this site that arrives in the email telling you that your part is shipped. Also if the belt is worn make sure to buy the FOUR bearing slides because they will be paper thin & worn. They cost almost $9.00 each and you need to replace all four but it is worth it! The total cost including ship ping for these parts and to do this repair myself was less than $70.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jaeson from State College, PA
Parts Used:
WE1M504
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Noisy GE Dryer.
I reviewed some tutorial videos on dryer noises and disassembly videos for my GE model. After opening the dryer, I discovered the noise was caused by a loose blower wheel rubbing against its housing. I first cleaned lint build-up out, then reseated the blower wheel and tightened the retaining screw on it. I test spun the drum by hand t o make sure the blower wheel turned freely without rubbing and noise. So far so good. I could have stopped there since that solved the noise problem BUT I also noticed a few other areas needing attention. Two of the four nylon drum glides were mostly worn through, and two were missing with their retaining tabs on the front drum bearing broken off. I found one missing glide but the other is still hiding out somewhere. So I ordered and installed replacement glides (PS755842) and a new front drum bearing (PS960316). Pretty easy to replace. The duct felt seal (PS9861764) looked a bit worn so I replaced that too. Although the drum belt (PS1766009) and idler pulley wheel (PS265721) seemed ok, I decided to replace these as well since I had everything opened up. The related the videos were really spot-on helpful. After watching them on the computer, I queued them up on my iPhone for quick & convenient reference while working at the dryer. The iPhone flashlight app was handy to have too. The most challenging step was replacing the drum belt. It's just awkward to reach and you are doing it mostly by feel. Not impossible though. Just take your time and note how the belt aligned (one side is grooved) and how it is looped around the drive shaft & idler pulley wheel. I find using a cup is handy for keeping all the screws together. And make sure you have enough space to work. Overall, the whole process was fairly easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from FORD, VA
Parts Used:
WE1M1067, WE3M26, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Load squeaking, rubbing noise in the front of dryer
I looked at the video on this site for replacing that part. If you watch the video you will have no proplem. It took me 20 mins to do the repair, may have been quicker if my hands would have been smaller to connect the wires back in the front panel.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX755842
Manufacturer Part Number: WE1M504
Brand
Model Number
Description
Kenmore
2661532110
Washer Dryer Combo - LAUNDRY CENTER
General Electric
2661532210
Washer Dryer Combo
General Electric
2661532211
Kenmore
2661532212
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2661532311
Washer Dryer Combo - LAUNDRY CENTER (ELECTRIC)
Kenmore
2661532312
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
2661532412
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
26715321
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532110
Washer Dryer Combo - LAUNDRY CENTER
General Electric
2671532210
Washer Dryer Combo
Kenmore
2671532211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532212
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532311
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532312
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532412
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361532110
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361532412
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
36361542
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542310
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542410
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371532110
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542310
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542410
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
363DDE8509RCMAA
Dryer
Kenmore
363DDE8509RCMWW
Dryer
Kenmore
363DDE9600RCMAA
Dryer
General Electric
61140418
Dryer