Drum Slide WE3X87
- Fix Number:
- FIX267877
- Manufacturer #:
- WE3X87
- Manufactured by:
- GE
Jump to:
Product Description
This small but essential part helps your dryer run smoothly and quietly. It supports the front of the drum, letting it spin with less friction and preventing wear and tear. Most dryers need three of these, and it’s best to replace them all at once. If your dryer is making squeaky or grinding noises, or if the drum feels stuck or wobbly, it might be time for new bearings. Replacing them is a simple fix that can prevent bigger problems down the line.
-
Works with the following brands:General Electric
-
Works with the following products:Dryer
-
Fixes the following symptoms:Noisy, Marks left on clothes
-
Part# WE3X87 replaces these:AP2042543, 2305, WE3X76, WE3X83, WE3X84
- Works with the following brands:
- General Electric
- Works with the following products
- Dryer
- Fixes the following symptoms
- Noisy, Marks left on clothes
- Part# WE3X87 replaces these:
- AP2042543, 2305, WE3X76, WE3X83, WE3X84
Questions and Answers
Be the first to ask our experts a question about this part!
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
2. Using phillips head screwdriver. Removed two screws holding down top of machine.?
3. Swung machine top lid back. Secure from falling shut.?
4. Disconnect two wires from door switch.?
5. Using socket wrench removed two hex head machine screws holding front panel onto machine.?
6. While reaching ... Read more in through door to hold drum, Swung entire front panel down and away from machine and carefully rested drum on frame.?
7. Removed felt strip from perimeter and set aside. Using flat head screwdriver, pryed worn drum bearing off of front panel. ?
8. Removed Support Spanner (white flexible plastic piece approx 8" x 2") from old drum bearing and put on new drum bearing.?
9. Put new teflon drum slides (this model takes 3) on 3 replacement drum bearings. Had to trim 1/4 inch from one slide.?
10. Snapped new drum bearing in place on front panel.?
11. Reverse step 1-6 above.?TIME: APPROX 30-40 MINUTES.
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: WE3X87
| Brand | Model Number | Description |
|---|---|---|
| General Electric | DRY3000SBLWH | Dryer |
| General Electric | HDL600SBLWH | Dryer |
| General Electric | HDS600SBLWH | Dryer |
| General Electric | YDL3000SBLWH | Dryer |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.