See part 216 in the diagram
( Grid squares measure 1x1 inch )
Idler Pulley Wheel
$31.03
In Stock
Fix Number: FIX265714
Manufacturer #: WE12X81
Manufactured by:
GE
-
Product Description
This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.
-
Works with the following brandsGeneral Electric, Hotpoint
-
Works with the following productsDryer
-
Fixes the following symptomsNoisy
-
Part Number Cross ReferencePart# WE12X81 replaces these:AP2620211, 275154, WE01X0530, WE01X0759, WE12X0033, WE12X0047, WE12X0081, WE12X33, WE12X47, WE12X81R, WE1X530, WE1X759, WE1X759D
Product Description
This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Dryer
-
Fixes the following symptoms:Noisy
-
Part# WE12X81 replaces these:AP2620211, 275154, WE01X0530, WE01X0759, WE12X0033, WE12X0047 ... Show more , WE12X0081, WE12X33, WE12X47, WE12X81R, WE1X530, WE1X759, WE1X759D Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Cruz from twentynine palms, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
Broken Belt
The belt had broken on the dryer and I had purchased a replacement locally. What I found after dissembling the dryer was the drum slides, idler pulley wheel and rear drum bearing were very worn and needed replaced. Each were very easy to remove and replace. Slight challenges were lining up the pulley, reseating the drum with the belt and solving the how the two (belt and pulley) were configured. It did require a second person. Note: Do not drop any parts into the dryer when reassembling. It will require you to start all over.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:HARRY from CORRALES, NM
-
Parts Used:WE12X81
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
The drum stopped tumbling.
I'd done this job before - the dryer is over 40 years old, simple and reliable. After unplugging the unit, I removed the vent hose where connected to the lower rear panel with a screwdriver. Using the nut driver, I removed the seven or so screws holding the rear panel, then removed it. With a flashlight, I could see the broken pulley wheel. The drive belt was still in good condition, thankfully. I removed the eclip holding the remnents of the idler wheel and removed it. I cleaned up everything I could reach with a rag and vacuum, then slipped on the new wheel, the eclip, and reattached the drive belt. I plugged in the dryer and ran it for a while to check my work, then unplugged it. I reattached the bottom panel again, hooked up the dryer vent, and moved the dryer back into position. Plugged it in, and it was good to go. The directions that came with the part are very clear and easy to follow. I'd done this repair twice before.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX265714
Manufacturer Part Number: WE12X81
Manufacturer Part Number: WE12X81
Brand
Model Number
Description