Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Guillermo
January 25, 2023
WE4M398-THERMISTOR TEST READING WITH A TESTER
For model number GFDS350
Hi Guillermo,
Thank you for your question. The inlet control thermistor should show continuity. When using a multimeter, you should see a reading of 120k ohms at room temperature and it should not have a closed or open circuit. If it does, it is not working correctly and it will need to be replaced. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to the dryer motor if t...
Simple to replace . Hardest part is getting belt off drum to remove drum . Once drum is out repair is easy . I also replaced the booster coil and the main coil . Also very easy . Inlet controll thermostat did not solve my problem . It had to be one of the coils . Dryer is fixed