Ratings submitted by customers like you who bought this part.
?
$21.88
In Stock
Fix Number:
FIX11747779
Manufacturer #:
WP99003605
Manufactured by:
Whirlpool
Product Description
This is an inlet/outlet bezel, also known as the air duct bezel, is for your dishwasher. It covers the vent openings in the dishwasher and prevents the dishwasher from leaking. It is gray in color and is approximately 4 inches in diameter. If the bezel is damaged, or the tabs holding in place are broken, you may need to replace it. Many of our customers have described this repair as easy. This is an authentic OEM part sourced directly from the manufacturer.
This is an inlet/outlet bezel, also known as the air duct bezel, is for your dishwasher. It covers the vent openings in the dishwasher and prevents the dishwasher from leaking. It is gray in color and is approximately 4 inches in diameter. If the bezel is damaged, or the tabs holding in place are broken, you may need to replace it. Many of our customers have described this repair as easy. This is an authentic OEM part sourced directly from the manufacturer.
Works with the following brands:
KitchenAid, Kenmore, Whirlpool, Maytag
Works with the following products:
Dishwasher
Fixes the following symptoms:
Leaking, Not cleaning dishes properly
Part# WP99003605 replaces these:
AP6014539, 6-919693, 99003605
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Holly
December 11, 2023
I have 2 grey, 4" circular pieces on the inside of my kitchen aid drawer dishwasher. Both have broken off, broken tabs. No longer stays in place. Drawer has anlso started leaking. Are these 2 the same part, or is the top one different from the bottom one? . Also, the circular filter piece is missing from the area these pieces cover. Do I need to replace that as well? I believe the piece is a BEZEL inlet/outlet. AP6014539. I just need to know if the top and bottom pieces are the same. Both need replaced. Thank you.
For model number KUDD03STPA10
Hi Holly, thank you for getting in touch. Based on our research, the part you are referring to is the same for the top and the bottom. Also, the circular filter piece you are referring to is part number FIX11750862. Please submit a new question if you have any follow-ups!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
The old Bezel broke off from the receiving bracket, inside of the tub.
Place new part,so it is flush with the inside wall over the receiving bracket it was located.Looking down at the part,apply pressure/push, while turning it clockwise,until it stops/locks on .Wah-La...you're done!
Note: this is a 2 drawer dishwasher. The front bezels/vents broke at the tab which locks in the module and compresses the seal. Remove the front panel starting with 2 screws on the bottom front. Pull front panel down to unlock and pull away. The next set of screws are fairly obvious, remove that layer of shielding. Not you can see th
... Read moree turbine looking vent module. There is one screw attaching it to the drawer, remove it, and disconnect 2 wires at the top. Now that module can be pulled away. Clean the sealing surface on the drawer and the module. Clean or replace the seal. Inspect the locking grooves to insure they are clear, the bezel tabs break off in those grooves. Reinstall module and lock in place with new bezel, move it around a bit to insure good seal. Reassemble in reverse. Note: there are 2 vents per drawer 4 total on machine, I would replace all 4 as they will most likely soon fail for the same reason.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.