Drain Pump - 55Hz 00611332
$59.36
In Stock
- Fix Number:
- FIX8727352
- Manufacturer #:
- 00611332
- Manufactured by:
- Bosch
Jump to:
Product Description
The pump ejects the water from the dishwasher through the drain hose.
-
Works with the following brands:Bosch, Gaggenau, Kenmore, Thermador
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Not draining, Noisy, Will Not Start
-
Part# 00611332 replaces these:AP4339596, 611332
- Works with the following brands:
- Bosch, Gaggenau, Kenmore, Thermador
- Works with the following products
- Dishwasher
- Fixes the following symptoms
- Not draining, Noisy, Will Not Start
- Part# 00611332 replaces these:
- AP4339596, 611332
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Lynford from WASHINGTON, PA
- Parts Used:
- 00611332
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
Dishwasher would not drain pump was not working.
1. Shut off power and water to the dishwasher. 2. Unhook drain hose from sink drain or garbage disposal. 3. Take screws out attaching dishwasher to counter. 4. Disconnect water supply to dishwasher. Have towel ready. 5. Disconnect power supply to dishwasher. 3 wires, black white, ground. Make a note of which wire goes where. 6. Pull out d
... Read more
ishwasher and lay it on it's left side. Pump is located in front on right side. 7. Note how pump is installed. 8. Disconnect snap in power cord to pump. 9. Pump just turns and comes off. Replace pump and snap in power cord. 10. Reverse process and reinstall dishwasher. Good Luck.
Read less
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX8727352
Manufacturer Part Number: 00611332
Manufacturer Part Number: 00611332
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.