Cleco Parts

Fix Number

FIX10304132

Manufacturer Part Number

832956

This is a genuine replacement part sourced from the original manufacturer for use with chisel scalers made by Cleco. The driver retainer attaches to the barrel and goes next to the retainer buffer. You may need a set of pliers when replacing this item. It may become broken and will need to be replaced. This is made of metal and is available as an individual replacement part.

Fix Number

FIX10335906

Manufacturer Part Number

308PT

This is an authentic replacement collet which is supplied directly from the original equipment manufacturer for use with Cleco and Dotco. This part allows a user to secure a router bit, keep in mind it is for use with 1/4" arbors only. It is made of high-quality metal and is sold individually, please note the collet nut is sold separately.

Fix Number

FIX10304116

Manufacturer Part Number

832554

Fix Number

FIX10304441

Manufacturer Part Number

864234

This part is an OEM from Cleco for use in nutrunners, grinders, and drills. The rotor blade attaches to the rotor and is made out of metal. If it becomes broken it will need to be replaced and may require a nutdriver during the installation. Keep in mind this high-quality part is sold individually.

Fix Number

FIX10303495

Manufacturer Part Number

2253PT

This authentic manufacturer approved replacement rotor blade is designed for use with Cleco and Dotco power tools. It fits in the rotor helping to push the air inside the tool. Depending on your equipment you may need more than one (1) of these blades. This part is made out of composite material and it is sold individually.

Fix Number

FIX10335262

Manufacturer Part Number

1008924

This authentic replacement part is designed for use with Dotco and Cleco equipment. The rollers take the load and spin, distributing the weight evenly while the minimal contact area reduces friction. It is made of high-quality metal and is sold individually. You will need a screwdriver and a wrench set to take apart and reassemble the housing when performing this repair. Make sure to check the diagrams for your model to ensure the correct replacement procedure.

Fix Number

FIX10303064

Manufacturer Part Number

203062

Fix Number

FIX10335963

Manufacturer Part Number

4293

This is an authentic OEM part for use in grinders, buffers, and sanders made by Dotco and Cleco. The filter disc goes between the motor housing and the filter retainer. During the installation process, a set of pliers might be needed to replace this item. It is made of a felt material and will need to be replaced if it becomes ripped or dirty. Keep in mind this high-quality part is sold individually.

Fix Number

FIX12145308

Manufacturer Part Number

1906PT

This part is sourced directly from Dotco and is designed to work with various Dotco and Cleco Grinders and Sanders. For full compatibility, please see the "Model Cross Reference List" below. The Rotor Blade is responsible for producing airflow inside the cylinder. If your tool has less power than before, it may be a sign that you have damaged Rotor Blades. If your Rotor Blades are cracked, chipped, or damaged, your tool will not operate properly, and they need to be replaced. Each blade is approximately 1" long, and are sold individually.

Fix Number

FIX10302489

Manufacturer Part Number

1008914

This part is sourced directly from Dotco and is designed to work with various Dotco and Cleco Drills, Grinders, and Power Motors. For full compatibility, please see the "Model Cross Reference List" below. The Rotor Blade is responsible for producing airflow inside the cylinder. If your tool has less power than before, it may be a sign that you have damaged Rotor Blades. If your Rotor Blades are cracked, chipped, or damaged, your tool will not operate properly, and they need to be replaced. Each blade is approximately 1" long, and are sold individually.