Weber Grill Hardware

Fix Number

FIX10511319

Manufacturer Part Number

67762

When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX10511538

Manufacturer Part Number

70302

Fix Number

FIX10512237

Manufacturer Part Number

83656

A burner with uneven flames or poor heating may have a dirty, damaged, or incorrectly placed burner cap. This black cap covers a high-output burner head and helps guide the flame outward for steady heat. First, let the cooktop cool and remove any grease or food blocking the burner openings. Dry every surface completely and reseat the cap before testing. Replacement may be needed if the cap is chipped, bent, corroded, or no longer rests evenly. Match the new cap to the appliance model and burner location because similar caps can differ. Stop using the cooktop and shut off the gas supply if you detect a gas odor.

Fix Number

FIX10511002

Manufacturer Part Number

62774

These are authentic manufacturer-sourced replacement parts that are supplied for use with Weber grills. This is the hardware kit which is used to secure the burner tubes and grease tray rails, please make sure to check appropriate diagrams of your model for correct application. This item includes four high-quality metal screws, keep in mind you will need a wrench or a flat-head screwdriver to install or remove the hardware.

★★★★★

★★★★★

1 Review

Fix Number

FIX10512592

Manufacturer Part Number

88206

This genuine OEM repair kit is used with Weber grills. This is a four-part assembly that includes two posts and two retaining clips. The posts are designed to hold the lid to the body of the grill while still allowing it to move freely like a hinge.

Fix Number

FIX10511064

Manufacturer Part Number

63049

This is a genuine Weber repair part used with charcoal grills. This is an eleven-piece repair kit that is used with the Lid Bale, a long metal piece that holds the lid open and on the back of the grill during cooking.

Fix Number

FIX10512224

Manufacturer Part Number

83196

This is an authentic manufacturer-sourced hardware which is specially designed for use with Weber smokers. It includes all the necessary bolts, screws and washers utilized on the unit. Please make sure to check the appropriate diagrams of your model for the correct locations and applications of this item. The components are made of high-quality metal and is sold as an individual pack. You will need a flat-head screwdriver and the wrench to secure or remove these parts.

Fix Number

FIX10511234

Manufacturer Part Number

65084

Fix Number

FIX16392588

Manufacturer Part Number

66357

Fix Number

FIX10511001

Manufacturer Part Number

62773

This is a genuine manufacturer sourced replacement kit designed for use with Weber grills. It is designed to secure the table to the frame. Includes two (2) rectangular metal washers and two (2) bolts. To tighten/loosen these bolts you would need a wrench.