OEM Tappan Washer Parts & Accessories

Drive V-Belt

$24.93

Fix Number: FIX1146950
Manufacturer Part Number: 134511600

If your washer drum is not spinning, there may be an issue with your drive belt. The drive belt wraps around the motor pulley and helps the basket to spin. Other signs there are issues with the belt is if there is a burning rubber smell, or the washer is noisy while spinning. The belt is subjected to wear and tear, and over time it may wear out. This is a genuine OEM part that is made of rubber.

Fixes these symptoms

Burning smell
Noisy
Spinning Issues
See more...

Installation Instructions

michael from Cave City, KY

browning clothes .zipper on jackets were tore off

after watching video and reading the review, whole job was simple Read more...

Watch the install video

Water Inlet Valve

$127.65

Fix Number: FIX815509
Manufacturer Part Number: 134190200

This washing machine water inlet valve has two ports for water to enter.

Fixes these symptoms

Leaking
No hot or cold water
See more...

Installation Instructions

Yvonne from East Greenbush, NY

Washer did not dispense cold water

lift the top of the washer and remove three hoses connected to the water valve. Disconnect both sets of wires on the water valve and remove the two screws holding it in place. Insert new water valve, screw into place, replace wires and hoses. Most difficult part of the process was removing the top hose because the ends of the clamp holding it in place were extremely small. Read more...

White Touch up Paint

$11.98

Fix Number: FIX467298
Manufacturer Part Number: 5303321319

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.

Agitator Drive Block

$63.38

Fix Number: FIX1152574
Manufacturer Part Number: 134418700

Fixes these symptoms

Will not agitate
See more...

Watch the install video

Remote Style Pump with Motor

$253.04

Fix Number: FIX417325
Manufacturer Part Number: 131268401

Use this with either a top load or front load washer. This pump has an horizontal mount.

Fixes these symptoms

Leaking
Will not drain
See more...

Hose Clamp

$2.38

Fix Number: FIX466832
Manufacturer Part Number: 5303318539

Sold individually.

Fixes these symptoms

Leaking
See more...

Installation Instructions

steve from Santa Fe, NM

Washing Maching Not Draining

1) Wet-Vac all hoses. 2) Remove hoses from pump 3) Release wire clamp to allow ground and plug to reach opposite side of new pump. Attach ground BEFORE attaching new pump to machine. Attach out let house (easy) Attach in-let hose. Impossible with existing clamp. Go to store and by screw clamp. Test machine. Done. Read more...

Agitator

$101.04

Fix Number: FIX446533
Manufacturer Part Number: 3204401

Fixes these symptoms

Will not agitate
See more...

Tub Seal Assembly

$74.78

Fix Number: FIX459481
Manufacturer Part Number: 5303279394

This seal helps prevent any leaking around the transmission of washing machines.

Fixes these symptoms

Leaking
See more...

Installation Instructions

William from Leeds, AL

Once the washer filled, leaking around the spin bearing resulted

I followed the videos included with the parts on the site. Those videos were a life saver. It took a lot of liquid wrench and penetrating oil to free up some of the parts for removal, but the saving was well worth the effort. I spent extra time cleaning up the basket and tub as well as the trunnion. As it turned out the small rubber washer included with the metal washer had completely disintegrated but there was also a squealing noise indicating the spin bearing was in need of replacement. All in all it was difficult to remove the trunnion but everything else went well. Read more...

Watch the install video