KitchenAid Washer Hoses and Tubes

Water Inlet Hose This part is the replacement water inlet hose for your washer. It is black in color, made of plastic, and is approximately 19 inches long. The water inlet hose connects the water inlet valve to the water fill nozzle. Over time the hose can become cracked and damaged, and this can cause it to leak. A damaged hose will need to be replaced. Be sure to disconnect the water supply to the washer before you begin this repair. You should also determine if any of the other parts that transport water into the washer are leaking, and if they need to be repaired as well. This part is sold individually and is a genuine OEM part.

Drain Hose It connects from the pump to the back panel. The clamp is not included.

Tub-to-Pump Hose Kit This kit comes with the clamps.

Drain Hose This drain hose is 42" long and includes the clamps.

Drain Hose This hose goes from the drain pump to the back of the washer.

Pump Hose

★★★★★

★★★★★

1 Review

This hose attaches to water pump assembly. NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.

Inlet Hose - 5 FT This hose can handle hot or cold water and is five feet long.

Drain Hose with Clamp Used to drain water.

Water Level Pressure Switch Hose

Extension Hose This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (Fix Number FIX334663) to connect the extension to the existing drain hose.