Washer Drums and Tubs

Shop By Brand

Popular Washer Drums and Tubs

$9.66
  In Stock
Drum Bearing Slide - White
★★★★★
★★★★★
(1)
Fix Number FIX755842
Manufacturer Part Number WE1M504
This single drum bearing slide attaches to the outer-most side of the bearing. This part is also sometimes referred to as a drum slide, drum glide, or drum pad. It provides support to the front of the drum as it rotates. They are approximately 3-inches long, 1 inch wide and made from a durable white plastic. If your appliance starts making unusual sounds, is not drying clothes properly, or leaves marks on clothes, it may be time to replace this part. The dryer has 2 slides, which we recommend replacing at the same time, as they tend to wear out at the same rate. You will need to order 2 of this part to replace both drum bearing slides, since it is sold individually. Before you begin this repair, be sure to disconnect the power to the dryer.
Fixes these symptoms
  • Marks left on clothes
  • No heat or not enough heat
  • Noisy
  • See more...
$6.50
  In Stock
Drum Bearing Slide - Green
★★★★★
★★★★★
(2)
Fix Number FIX6447706
Manufacturer Part Number WE1M1067
This single drum bearing slide is an OEM approved replacement part for dryers. It can also be known as a bearing drum slide, pad, or glide. The slides attach to the inner most slots on the front bearing. As the dryer rotates, the drum bearing slides help to support the front of the drum. If your appliance becomes noisy, is not drying properly, or leaves marks on clothes, it may be time to replace it. If you are replacing one slide, we recommend replacing the other slide at the same time, as they deteriorate at a similar rate. You will need to order 2 of these parts as there are 2 in each dryer. It is approximately 2.6-inches deep, 0.06-inches in height, and 0.5-inches wide. This part is denoted as being green in the title, however users and technicians have noted it is actually gray in color.
Fixes these symptoms
  • Marks left on clothes
  • No heat or not enough heat
  • Noisy
  • See more...
$6.26
  In Stock
Drum Glide Bearing - White
Fix Number FIX4704230
Manufacturer Part Number WE3M51
Fixes these symptoms
$45.86
  In Stock
Washer Baffle
★★★★★
★★★★★
(1)
Fix Number FIX11744968
Manufacturer Part Number WP8182233
This part moves the clothes around inside your dryer/washer and helps to direct the flow of hot air during the drying cycle. Sold individually.
Fixes these symptoms
  • Marks left on clothes
  • Noisy
  • Shakes and moves
  • See more...
$48.07
  In Stock
Drum Baffle
Fix Number FIX11751921
Manufacturer Part Number WPW10283356
Sold individually. Baffle only. No screws are required. The baffle has hooks that slide onto the basket.
Fixes these symptoms
$30.72
  In Stock
Drum Baffle
Fix Number FIX3408272
Manufacturer Part Number 134952702
Sold individually.
$46.05
  In Stock
Baffle
Fix Number FIX11751113
Manufacturer Part Number WPW10250572
$86.82
  In Stock
RING BALANCE Assembly
Fix Number FIX8757351
Manufacturer Part Number WH45X10138
Fixes these symptoms
$51.62
  In Stock
Tub Baffle
Fix Number FIX11746266
Manufacturer Part Number WP8540360
This is the replacement tub baffle for your washer. It is made of black plastic and is approximately 13 inches by 2 inches. This part is sold individually and is an OEM part sourced directly from the manufacturer. The tub baffle is found inside the washer tub, and it helps tumble your clothes. If the baffle is damaged or missing, you may notice marks being left on your clothes. The main reason you would replace the baffle is if you notice these marks, or if the baffle is broken, or keeps falling off.
Fixes these symptoms
$84.94
  In Stock
Inner Tub Base Hub
Fix Number FIX273296
Manufacturer Part Number WH45X10027
This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, and it holds the spin basket on the gear case shaft. The main reason you would want to replace the hub, is if the washer will not agitate, or if you notice excessive noise or shaking when the washer is in use. Be sure to disconnect the washer from the water and power sources before you begin this repair. This part is sold individually and is and OEM part from the manufacturer.
Fixes these symptoms
  • Noisy
  • Pumps but will not spin
  • Shakes and moves
  • See more...

Brands