Washer Dryer Combo Pumps

★★★★★

★★★★★

4 Reviews

Fix Number

FIX3579318

Manufacturer Part Number

4681EA2001T

This is a drain pump motor assembly for washers. This OEM part is responsible for removing water from the washer during the drain part of the cycle. When this part is clogged, damaged or defective it can cause the washer to not drain properly. Keep in mind that the pump casing is sold separately. This repair is rated medium-difficulty and can vary depending on the model. For this repair you will need a Philips screwdriver, a small flat blade screwdriver, needle nose pliers, and slip joint pliers. Do not forget to disconnect the power before you begin this repair. In general, this repair can be started by removing the top of the washer followed by the front panel. Moving down the front of the appliance, remove the door, latch, tub gasket, and drainer cover. The drain hoses and clip will need to be disconnected from under the drain assembly. To install the new pump motor, reassemble parts in the reverse order. We recommend taking photos while disassembling and keeping screws and parts neatly organized.

Fix Number

FIX11741239

Manufacturer Part Number

WP3363394

The direct drive water pump is used in washing machines that do not have belts, to remove water from the tub during the drain cycle. It is located on the motor and attached by two clips. The drain pump has two ports for water to pass through, one port is larger than the other, and this is where the hoses connect. If your washer leaks, will drain the water, or is filling and draining at the same time, there may be an issue with your pump. Blockages or clogs in the hoses may be contributing to this. Before you replace the pump, be sure to disconnect the power and water lines to your appliance. This repair requires a pair of slip-joint pliers, a flat head screwdriver, and a putty knife. You may find it useful to have a container on hand to collect any water left in the hoses, and to have another person to assist with lifting and lowering the machine. This is a genuine OEM part made of durable white plastic. Other names you may know it by include direct drive washer pump, drain pump, washer drain pump, or water pump.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX11757304

Manufacturer Part Number

WPW10730972

There are a number of symptoms that indicate there may be an issue with your washer drain pump. These include signs of leaking, excessive noise, if your washing machine will not drain, or if it pumps but will not spin. If you are experiencing any of these, a replacement drain pump may be necessary. This is a genuine OEM part, so it is guaranteed to work with your washer. Be sure to disconnect the power supply to your washer before beginning this repair. We find it easiest to access the panel if the front of the washer is elevated, a couple of wood blocks under the feet will help achieve this. Before removing the old pump, have a container handy to drain any water remaining in the pump or hoses.

Fix Number

FIX11706439

Manufacturer Part Number

5859EA1004P

This drain pump helps your LG or Kenmore washer get rid of water after each cycle. If your washer isn’t draining, leaves water in the tub, or makes strange noises, replacing the pump could fix it. It’s a reliable part with a strong motor and fits many models. Just unplug your washer before installing.

Fix Number

FIX7783938

Manufacturer Part Number

137221600

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.

Fix Number

FIX16218041

Manufacturer Part Number

W11458345

This genuine water pump assembly helps remove water from the washer during the drain cycle. It’s a durable replacement for select models and may resolve issues like poor drainage or standing water. Be sure to unplug the washer and confirm compatibility before installation.

Fix Number

FIX11770076

Manufacturer Part Number

W10919003

Ensure your washing machine drains properly with this Whirlpool drain pump assembly. Expertly engineered for reliable performance, it removes water from the washer during the spin and drain cycles. Compatible with multiple models across Whirlpool and related brands, this OEM part is built for durability. Before installation, unplug the appliance and consider wearing gloves to protect your hands. A faulty pump can lead to drainage issues, making this replacement a smart solution for restoring efficiency.

Fix Number

FIX2342445

Manufacturer Part Number

137108000

Designed for front-loading washers, this drain pump assembly removes water during the drain cycle to keep your machine running smoothly. It’s compatible with a variety of models from brands like Frigidaire, Electrolux, and Kenmore. A great solution for drainage issues, and installation is straightforward with standard tools.

Fix Number

FIX3522306

Manufacturer Part Number

383EER2001A

This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.

Fix Number

FIX16218540

Manufacturer Part Number

5304524452

This is a genuine drain pump, which works with washer dryer combos.