KitchenAid Washer Dryer Combo Seals and Gaskets

Fix Number

FIX11741506

Manufacturer Part Number

WP339956

This genuine OEM part is a lint trap housing seal for your dryer. This part is used to form an airtight seal at the back of the dryer drum and the lint duct. The foam seal is approximately 28 inches in length, 1 inch wide, about half an inch thick, and has an adhesive backing. The seal is located between the lint duct and the bulkhead of the dryer. You may need to replace the seal if there is air leaking from the dryer while it is running, which would result in your laundry taking too long to dry.

Fix Number

FIX11723081

Manufacturer Part Number

W10814296

Stop leaks before they start with this outer tub seal. It fits between the tub and base to keep water inside where it belongs. At about 2 inches across, this sturdy black gasket is built to last. Installing it takes some work—you’ll need to unplug the washer, disconnect hoses, and remove the tub—but replacing a worn seal now means fewer leaks and better performance later.

Fix Number

FIX11746747

Manufacturer Part Number

WP8577376

Sold individually.

Fix Number

FIX11741857

Manufacturer Part Number

WP356427

This seal is for the top of basket drive tube shaft.

Fix Number

FIX11746864

Manufacturer Part Number

WP91939

Transmission shaft seal.

Fix Number

FIX12070813

Manufacturer Part Number

W11095997

This seal creates a tight barrier between appliance components to prevent leaks, air loss, or moisture intrusion. Maintaining proper sealing is essential for efficiency and performance, making this part a common replacement when the original seal becomes brittle or deformed.

Fix Number

FIX334265

Manufacturer Part Number

279735

Creates a seal between the rear panel and the rear of the drum.

Fix Number

FIX11741173

Manufacturer Part Number

WP3349985

This part prevents the agitator shaft from leaking oil onto the transmission.

Fix Number

FIX16744945

Manufacturer Part Number

W11613302

Adhesive sold separately.

Fix Number

FIX334494

Manufacturer Part Number

285352

This two piece oil seal kit comes in two pieces and is used for the gearcase input shaft of your washer.