Maytag Trash Compactor Parts

Maytag Appliance Parts

Popular Maytag Trash Compactor Parts

15 Inch Compactor Bags - 15 Pack
$26.73
In Stock
Fix Number
FIX1964579
Manufacturer Part Number
W10165295RP
These bags will fit most 15" rectangular compactors.
Charcoal Filter
$15.70
In Stock
Fix Number
FIX11742279
Manufacturer Part Number
WP4151750
Tired of unpleasant smells coming from your trash compactor? This charcoal air filter is a quick fix. It’s made from odor-absorbing carbon and fits right into your compactor—no tools needed. Just pop it in and enjoy a fresher kitchen. It works with Whirlpool, KitchenAid, and similar models, and its compact size makes it easy to handle.
Fix Number
FIX1964577
Manufacturer Part Number
W10165294RB
Plastic compactor bags. 50% post-consumer recycled plastic 3 millimeters thick to protect from tearing. Slip-N-Grip design prevents the bag from slipping into the compactor. Fits 15" rectangular compactors.

Installation Instructions

James from Warwick, NY
Ran out of compactor bags
I put in a new bag. Honestly guys, filling out this questionnaire took more time than replacing a bag, something we do every week. I know that you mean well, but perhaps you should try to differentiate between disposable items and true repair parts. Read more...
Drawer Roller
$16.75
In Stock
Fix Number
FIX11747573
Manufacturer Part Number
WP9871602
This is a genuine OEM replacement part. This bearing roller is commonly used in the assembly of trash compactors, it allows you to easily slide the container out of the appliance. If the drawer becomes challenging to open or close it could be an issue with the roller. There is one located on each side of the compactor, however these are sold individually. Before repairing your appliance disconnect it from the power source.
Fixes these symptoms

Installation Instructions

Ben from Howell, MI
Trash Compactor the drawer was very hard to open
In replacing the old partial rusted drawer slides had rusted screw with nuts that spun had to drill them out and replaced front larger bolt and nut the rear screw used a larger sheet metal screw. The wheels and bearing with on easy the instructions showed a modification to remove a tab for the different wheel assembly and installed just like the instructions. When done the drawer will slide out with just touch of your foot on open tab GREAT!! I was looking at buying a new compactor the repair saved me about 700 $. Thanks a lot. Never had a trash Compactor before this great and it keeps my puppy out of trash. Read more...
Trash Compactor Directional Switch
$56.05
In Stock
Fix Number
FIX11744742
Manufacturer Part Number
WP777811
This is an OEM part sourced directly from the manufacturer. This is a top limit and directional switch that is designed for use with trash compactors. This switch will interrupt the current that flows to the motor when the ram reaches the top of the compactor. When the ram reaches the top of the compactor this switch reverses the motor direction. You may have a problem with your switch if you compactor wont stop running at the end of the cycle. Before you replace this part make sure you have unplugged your trash compactor.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • Noisy
  • See more...

Installation Instructions

Chad from Moreno Valley, CA
Trash Compactor would not stop after cycle and would make a ton of noise
I had a couple of problems with my trash compactor, it was present in the home when we bought it. First it wouldn't turn on, the on/off switch was broken so I replaced the switch and knob assembly. Then the unit would run through a cycle and wouldn't stop at the end and would make a loud banging noise. My directional switch was the suspect at first because it was in bad shape to begin with, looked like it had gotten stuck at some point and bent the arm. I replaced the directional switch and it didn't help. Then I realized that the on/off/start panel showed that the start button was stuck in the on position. This was delivering constant current and wouldn't allow the unit to stop. DON'T spend $150 for a new start/on/off panel. I took the panel off and separated the front from the back to expose the buttons from the inside. The start button was stuck so I took the parts out and reassembled them, they're all little plastic and metal pieces that interlink. After I reassembled the buttons' insides I reassembled the panel and reinstalled it. The unit works fine now. Read more...
Handle - Black
$127.63
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11747567
Manufacturer Part Number
WP9871267
Screws sold separately.
Fixes these symptoms
  • Drawer is hard to open and or close
  • Won’t stay on
  • See more...

Installation Instructions

Karen from Sewickley, PA
Handle cracked
Simply removed old handle involving t 3 screws and replaced it with new handle and tightened the screws. Simple! Read more...
Switch Knob
$52.99
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11747576
Manufacturer Part Number
WP9871800
Also known as a rotary switch knob.
Fixes these symptoms

Installation Instructions

Ronald from MOVILLE, IA
Switch knob broke off with part of the switch tube still in place.
Used a Philips screw driver, inserted it into the broken portion of the switch tube, turned it left to clear the ear slots which hold it in place. It then popped out and aligned the new switch and inserted, then turned to on to hold the switch in place. Simple. Read more...
PEDAL-FOOT,DEEP,BLK
$40.12
In Stock
Fix Number
FIX16763328
Manufacturer Part Number
W11636605
This black foot pedal lets you open your trash compactor hands-free by stepping on it, engaging the drawer release mechanism. It’s a direct replacement for a worn, broken, or missing pedal and is compatible with select Whirlpool models. Check your model number to confirm fit before replacing.
Fixes these symptoms
  • Drawer is hard to open and or close
  • Won’t stay on
  • See more...

Installation Instructions

Arley from Ashland, KY
Pedal broken in half.
Remove two screws from old one. Screw same screws in pedal. Read more...
Rotary Switch Kit
$95.31
In Stock
Fix Number
FIX382679
Manufacturer Part Number
675382
This kit comes with an on-off rotary switch and two chrome knobs.
Fixes these symptoms
  • Doesn’t stop at end of compacting cycle
  • Won’t start
  • Won’t stay on
  • See more...

Installation Instructions

Kenneth from New Tazewell, TN
Quit after 38 years. Suggested a switch (s) failure
Removed two screws on front panel which allowed panel to become easily reachable. Replacement of rotary switch kit very simple. Did not replace sectional switch at this time. Back in operation. Read more...
Fix Number
FIX11747965
Manufacturer Part Number
WPW10001130
Sold Individually.
Fixes these symptoms

Installation Instructions

Margaret from McLeansville, NC
Washing Machine Out of Balance - Missing Leveling Feet
The was an extremely simple repair. Tilted the washer up, placed the nut on the level foot, inserted the leveling foot in the slot and voila! Done. Absolute easiest repair ever. Read more...

Maytag Trash Compactor Appliance Types

Related Maytag Trash Compactor Parts

Popular Maytag Trash Compactor Models