RCA Refrigerator Doors

Retainer Bar End Cap - Left or Right Side The end cap is used to hold the retainer bar on the fridge door in place. This genuine OEM part is made of white plastic and can be used for either the left or righthand side of the bar. The retainer bar keeps items from falling off the shelf when the fridge door is open and closed. If an end cap has become damaged, the retainer bar may not stay in place properly. The end caps are sold individually, so if you need to replace more than one, please be sure to order the correct quantity. To replace an end cap, you will need a small flat blade screwdriver to release the locking tabs.

Door Closing Cam

★★★★★

★★★★★

1 Review

This single door closure cam is mounted on the door, not the hinge.

Door Shelf Retainer Bar End Cap This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door. It is a little more than 2 inches long and is made of white plastic. To replace the end cap, you can simply depress the locking tab and remove the entire bar and end cap assembly. Then, use a flat blade screwdriver to depress the locking tab, and the endcap will detach. Finally, snap the new end cap locking tabs into place, and snap the bar assembly back onto the freezer door. This product is sold individually.

Door Shelf End Cap Sold individually.

Door Shelf Retainer Bar End Cap - Left or Right Side This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.

Fresh Food Door Gasket This white fresh food door gasket used to seal the refrigerator door when closed.

Door Hinge Shim This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.

Ice Storage Door

Ice Storage Door This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.

Single Door Handle End Cap Trim - Chrome Screws are sold separately.