Jenn-Air Refrigerator Parts

Jenn-Air Appliance Parts

Popular Jenn-Air Refrigerator Parts

Refrigerator Ice and Water Filter
$103.96
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11701542
Manufacturer Part Number
EDR1RXD1
Your refrigerator water and ice filter should be replaced at least every 6 months, to prevent water that has an undesirable taste and odor, or if left for too long, can cause leaks and ice maker malfunction. The location of this filter can vary depending on your model. Some common locations to check include the top right corner of the interior compartment, the bottom left grille, or the middle of the interior. This filter is an original manufacturer part and NSF-certified. It has a straightforward, quick-turn installation feature that does not require the use of tools.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Marilyn from Darrouzett, TX
Filter needed to be replaced
I opened the small door and observed how the arrows lined up on the bottom of the one in the slot. I pulled the cylinder our and placed the new one with the arrows pointing the same way and pushed it in and closed the small door. Then pushed the reset button until the green light came back. Be sure to take the coverings off the two openings! Read more...
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11722130
Manufacturer Part Number
EDR4RXD1
This package contains one individual water filter that is NSF-certified, and OEM approved. To ensure that the filter is successfully removing contaminants, it will need to be replaced at least every 6 months or 200 gallons of water. This will ensure tasteless and odor-free water. It has approximate measurements of 2-1/2 inches deep, 1-1/2 inches wide, and 8 inches high. This is a simple installation. This filter is found on the interior of the refrigerator in a drop-down style housing. Pop out the old filter, slide the new filter in place and turn it until it clicks. Be careful not to over-tighten. Close the cover. Run your dispenser to activate the filter and clear out air bubbles. A loud air pressure sound is completely normal. Reset your water filter indicator if applicable.
Fixes these symptoms
  • Fridge too cold
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • See more...

Installation Instructions

Blaine from Huntley, IL
Needed new h2o filter
Used my hands only...no tools necessary Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX11757048
Manufacturer Part Number
WPW10671238
This part is the center crisper drawer slide rail which helps to support the crisper drawers in your refrigerator. If you have difficulty opening or closing your crispers, the center slide rail may be broken and needs to be replaced. Too much weight on the shelf above or in the crisper drawers may cause the center slide rail to break. Replacing this part is easy and does not require any tools. First remove any items off the crisper shelf along with the crisper drawers, then carefully remove the glass shelf. Once you can access the broken center slide rail, gently pull forward on the crisper shelf frame and pull the rail out. Take your new part and line up the locator tab at the rear of the rail, pull the crisper shelf forward, and drop the new rail into place. You can then replace the glass shelf and the crisper drawers, which should now easily slide in with the new rail installed. This is a genuine OEM part, made of white plastic and approximately 13.5 inches in length.
Fixes these symptoms
  • Clicking sound
  • Door won’t open or close
  • Fridge and Freezer are too warm
  • See more...

Installation Instructions

Ruthann from CHEVY CHASE, MD
center bracket broke
Just took the glass out of the shelf above the crisper drawers, snapped the new bracket in place, and replaced the drawers. Nothing to it. Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11722128
Manufacturer Part Number
EDR3RXD1
It is recommended to replace your refrigerator water filter every 6 months or 200 gallons of water. This will ensure consistently good-tasting water that is free of pollutants. This NSF-certified filter is designed so it is easily accessible and simple to replace. It can be found in the front, bottom panel of your appliance. Remove your new filter from the packaging, making sure to remove the port cover. Pop out the older filter by pressing the push-button to the left of the filter, reapply the bottom cap to the new one, and slide it into the holder until you hear a click. To activate the filter, thoroughly run the dispenser, a loud air pressure sound is normal. This filter is sold individually.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Lula from Kansas City, MO
Water Filter needed to be changed
I found where the filter was located and let my husband replace the filter. Read more...
Fix Number
FIX2580853
Manufacturer Part Number
W10311524
Your refrigerator air filter should be replaced at least every 6 months to ensure its working as it should. This part is responsible for reducing common food odors and bacteria in the air, improving unpleasant smells and flavor of ice. The location of this part can vary from model to model; however, it is commonly found under a small cover on the back-middle-top of your refrigerator, which can usually be popped off quite easily. This is part does not include the indicator; it is the filter only.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Fridge too cold
  • See more...

Installation Instructions

Margaret from Saint Paul, MN
filters needed replacing
I had to remove the top shelf to access the air filter.It was tricky getting the old filter out, but east to install the new one. The produce filter was much easier to replace since it is just inside the produce drawer. The compartment that holds the filter is removable and easy to open. Read more...
Light Bulb - 40W
$11.73
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX884734
Manufacturer Part Number
8009
This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

Installation Instructions

Helen from Quincy, MA
lightbulb in refrigerator went out
Removed plastic shield on top of refrigerator. Removed old bulb.. Replaced new bulb. Reinstalled plastic shield. Voila! Read more...
Center Rail
$27.51
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11752912
Manufacturer Part Number
WPW10326469
This is a factory-certified center support rail for your refrigerator crisper drawer. This rail supports the center of the crisper frame, holding the drawer securely in place. It is made of white plastic, measures 15-inches long, and if broken, may cause your drawer to not close properly. This is a very quick and easy repair that does not require any tools. Simply slide the crisper drawers out, lift up the glass shelf, and slide the new support rail into place. This part is sold individually.
Fixes these symptoms

Installation Instructions

Virginia from PARROTTSVILLE, TN
center rail broke for crisper draws
take out broken pieces install new rail slide draws back in Read more...
★★★★★
★★★★★
12 Reviews
Fix Number
FIX11738134
Manufacturer Part Number
W10874836
This pantry end cap kit is used to keep your refrigerator drawer from sliding all the way out. This kit includes both the right and left side end caps, and the pins which hold them in place. The manufacturer recommends replacing both sides at once, even if only one is broken, to ensure your drawer slides smoothly. This part is sold as a kit, unfortunately the manufacturer does not supply these parts for sale individually. If your end caps no longer hold the drawer in place, or if they have become visibly damaged, they need to be replaced. The dimensions are approximately 9 inches by 25 inches, and it is made of durable white plastic. For this repair, start by removing the 3 screws holding the end cap in place. Next, remove the pin and end cap and replace with the new one.
Fixes these symptoms
  • Door won’t open or close
  • Fridge too cold
  • Noisy
  • See more...

Installation Instructions

Warren R . from Ottumwa, IA
endcap drawer lid pin broken and pantry drawer lid clear window (plastic) cracked
Removed old pantry drawer /and plastic lid and glass shelf above as well as the two slide in drawers above(for work room) Used nut driver to remove (2) screws on right side holding drawer slide and (2) screws holdin endcap. carefully removed the piece and worked it loose. It is connected to another piece at the end, just angle it out. Switched the plastic slide piece from old to new and reinstalled side piece with nut driver. Plastic pantry drawer lid put on at this time. Open and close and check for fit My pantry drawer lid seems to catch a little right in the middle when opening. Read more...
Water Filter
$90.73
In Stock
Fix Number
FIX11722126
Manufacturer Part Number
EDR2RXD1
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne parasites, lead, and pesticides. The filter should be replaced every six months, or when 200 gallons of water have passed through, to ensure optimum contaminant reduction. The filter is found in the top right corner of your fridge, and replacing it is easy. Simply pop out the old one (keep a bucket underneath to catch any water) and slide in the new one. You will hear a click once it has locked into place. You should run water through the filter for a couple minutes prior to use. This filter measures approximately two inches wide, two inches deep, and 7.5 inches long.
Fixes these symptoms
Fix Number
FIX11743468
Manufacturer Part Number
WP67001716
This crisper drawer cover support is also called a ladder hook, and it is used to support the lower crisper shelf in your refrigerator. If this hook breaks, the shelf will drop out of place and you will not be able to open your crisper drawers. To do this repair, you will need to remove the crisper drawers, the glass shelf, and the plastic shelf frame. To remove the old support, you can use a flat blade screwdriver to pop it free. The new support is then pushed into place and then pulled down until it locks. This support is an authentic OEM part that is white in color.
Fixes these symptoms

Installation Instructions

Moises from Trenton, NJ
Bottom shelf clips broke
Pulled the bottom shelf out an in rear of the refrigerator are two clips one on each side slid in hole your done Read more...

Appliance Type

Related Pages

Popular Jenn-Air Refrigerator Models