Hardwick Refrigerator Parts

Fix Number

FIX17216393

Manufacturer Part Number

W11679940

Substituted with part number PS869887.

★★★★★

★★★★★

1 Review

Fix Number

FIX11752093

Manufacturer Part Number

WPW10289497

If the door shelf bin in your refrigerator is cracked, missing, or no longer holding items securely, this clear plastic replacement bin may be just what you need. Designed to fit inside the refrigerator door, it provides convenient storage space for jars, bottles, condiments, and other small items. Featuring a transparent body with a white trim along the top edge, it blends seamlessly with most interior styles. Measuring approximately 14 inches wide, 3.5 inches high, and 7.75 inches deep, it offers a snug and functional fit for select refrigerator models. Be sure to verify your appliance’s model number to ensure compatibility.

Fix Number

FIX11743531

Manufacturer Part Number

WP67003405

This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when you close the door. If your refrigerator door will not close properly, you may need to replace the pivot block. This part is sold individually and is an OEM part sourced directly from the manufacturer.

★★★★★

★★★★★

1 Review

Fix Number

FIX12723959

Manufacturer Part Number

W11368721

This door gasket is for refrigerators. The door gasket is on the inner door panel and creates a seal around the door to prevent warm air from entering the refrigerator.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX12728638

Manufacturer Part Number

W11384469

Door switch turns the light off when you close the door.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX2121513

Manufacturer Part Number

D7824706Q

If your freezer has stopped making ice cubes, it may be time to replace your ice maker. Normal wear and tear, or accidental damage may be the cause of this. This model includes the control device and ice mold, which are made of plastic and metal, and measure approximately 11 inches long by 5 inches wide. Please note that this kit does not include the cover, ice level arm, or the wire harness. These parts can be ordered separately, or you can use the existing parts from the original ice maker. This Replacement Ice Maker is a genuine OEM part and is also known as an Ice Maker Assembly or a Refrigerator Ice Maker. Installation will require a quarter inch nut driver, and make sure that you disconnect your power and water supply before beginning this repair. Once the new part is in place, your fridge will begin making ice again within a few hours.

Fix Number

FIX11738973

Manufacturer Part Number

WP2169142

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.

★★★★★

★★★★★

4 Reviews

Fix Number

FIX11722130

Manufacturer Part Number

EDR4RXD1

This package contains one individual water filter that is NSF-certified, and OEM approved. To ensure that the filter is successfully removing contaminants, it will need to be replaced at least every 6 months or 200 gallons of water. This will ensure tasteless and odor-free water. It has approximate measurements of 2-1/2 inches deep, 1-1/2 inches wide, and 8 inches high. This is a simple installation. This filter is found on the interior of the refrigerator in a drop-down style housing. Pop out the old filter, slide the new filter in place and turn it until it clicks. Be careful not to over-tighten. Close the cover. Run your dispenser to activate the filter and clear out air bubbles. A loud air pressure sound is completely normal. Reset your water filter indicator if applicable.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11743502

Manufacturer Part Number

WP67002659

The crisper drawer is used to help prolong the life of your produce, by sealing itself off from the rest of the fridge to create a high humidity environment. If your drawer has become cracked or damaged, the drawer may not work as intended and should be replaced. No tools are required for this repair, simply remove the old drawer and slide a new crisper drawer into place. This is a genuine OEM product that is made of a clear plastic and sold individually.

Fix Number

FIX11738573

Manufacturer Part Number

WP12656105

This pantry end cap is a genuine OEM replacement part for your refrigerator. Also known as a drawer support, it is used to hold the rails and shelving for your pantry and crisper drawers. This specific piece is for the left-hand side, as if you are facing the fridge. For this repair you will need a quarter-inch nut driver in order to remove the slide rails and the hex screws that hold the end cap to the refrigerator wall. There are two rear slots and one front tab that the new shelf needs to engage with for installation, then the hex screws can be put back in place with the nut driver.