KitchenAid Range Switches

KitchenAid Appliance Parts

Popular KitchenAid Range Switches

★★★★★
★★★★★
1 Review
Fix Number
FIX11740783
Manufacturer Part Number
WP3149400
If the large surface burner on your range will not heat up, you may need to replace the switch. This genuine OEM switch is used to control the temperature of the large 8-inch burner, along with turning it on and off. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be working with electrical components. When replacing the switch, the electrical harness features slip-on terminals for easy installation and connections to the switch. You should examine the terminals for signs of arcing or corrosion. If these signs are present, the terminals will need to be replaced as well. The shaft for the burner knob may be longer than the switch you just removed, but you will be able to remove the excess length by using a pair of pliers. If you also need to replace the knob used to turn the switch, it can be purchased separately.
Fixes these symptoms
  • Element will not heat
  • Oven is too hot
  • Oven not heating evenly
  • See more...
★★★★★
★★★★★
1 Review
Fix Number
FIX11754687
Manufacturer Part Number
WPW10434452
This switch controls the stove top surface burner.
Fixes these symptoms
Fix Number
FIX11740785
Manufacturer Part Number
WP3149404
This switch controls the stove top 6" surface burner.
Fixes these symptoms
  • Element will not heat
  • Oven is too hot
  • Will Not Start
  • See more...
Fix Number
FIX11740775
Manufacturer Part Number
WP3148953
This switch controls the stovetop surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Infinite Switch
$84.58
In Stock
Fix Number
FIX12114485
Manufacturer Part Number
W11129442
This surface burner switch regulates the temperature of the left front burner on an electric range. It turns the burner on and off to maintain the selected heat level. A damaged switch may cause heating issues.
Fixes these symptoms
Burner Switch - Right Front
$168.16
In Stock
Fix Number
FIX11731368
Manufacturer Part Number
W10857622
This dual surface element control switch is an OEM replacement part for select ranges. It controls the surface element, allowing you to turn it on or off and adjust the heat level. If your surface element is malfunctioning or not responding to adjustments, replacing the control switch can resolve the issue. To install the new switch, unplug the range or turn off the house circuit breaker to ensure safety. The switch is typically located behind the front control panel of the stove. Remove the panel and disconnect the old switch from its wiring connections. Install the new switch by securing it in place and reconnecting the wiring. After installation, restore power to the range and test the surface element to ensure proper function.
Infinite Switch - 6 Inch
$67.21
In Stock
Fix Number
FIX11740774
Manufacturer Part Number
WP3148952
This part carries 5.2-6.6 amps.
Fixes these symptoms
Range Surface Element Control Switch
$192.69
In Stock
Fix Number
FIX11747407
Manufacturer Part Number
WP9763762
This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Surface Element Switch
$81.89
In Stock
Fix Number
FIX11770037
Manufacturer Part Number
W10917724
Inifinite Switch
$107.69
In Stock
Fix Number
FIX11754114
Manufacturer Part Number
WPW10391743
This switch controls the heat level of a triple surface burner on an electric range. If the burner fails to heat properly or responds unpredictably, replacing this part may resolve the issue. To install, first shut off the power to the appliance. Remove the control panel, detach the faulty switch, and connect the new one using the existing wiring. Always wear gloves and follow safety precautions during replacement.

Related KitchenAid Range Parts