Microwave Oven Combo Igniters

Fix Number

FIX470129

Manufacturer Part Number

5303935066

If your gas range will not heat up, is not coming up to temperature, the igniter is not glowing, or it glows but will not light, you may need to replace the igniter. This part is a genuine OEM flat style oven igniter and includes two ceramic wire nuts to assist with installation. The igniter is used to light the oven burner in your range by igniting the gas. Before beginning this repair, please be sure to disconnect the power and gas supply to your range. When handling this part, be careful not to touch the black element on the igniter, as this section is very fragile. The igniter measures approximately 3.72 inches in length, with 18 inches of wire lead, and has an amperage range of 3.2 to 3.6.

Fix Number

FIX1573892

Manufacturer Part Number

12400035

If your gas oven isn’t lighting properly, this flat-style igniter kit might be the fix. It helps open the gas valve and ignite the burner for baking or broiling. It works with many ovens and replaces both short and long flat igniters—but not round ones. If your igniter glows but doesn’t light the burner, it’s probably too weak. The kit includes everything you need: the igniter, wires, bracket, and instructions. It’s about 3 ¾ inches long and easy to install with basic safety steps—just unplug the oven and turn off the gas. Sold individually.

Fix Number

FIX4241428

Manufacturer Part Number

DG94-00520A

This is an oven burner igniter made for use with Samsung ovens. This oven burner igniter is designed to ignite the gas that flows into it, to produce heat. However, over time and with further frequent use or food contamination, this burner can fail and will need to be replaced. If your burner is glowing red or orange, it is functioning as intended, but if your oven does not heat up properly, it likely needs replacement. This oven burner igniter is an OEM part that comes by itself and does not come with any of the screws necessary to secure it inside your oven.

Fix Number

FIX16554211

Manufacturer Part Number

DG94-01441A

In a gas oven, the igniter is responsible for starting the process that produces the flame needed to heat the oven. When you turn on the oven, the igniter begins to heat up rapidly. Once it reaches a certain temperature, it triggers the gas valve to open, allowing gas to flow into the burner. This burner igniter is sold individually.

Fix Number

FIX387058

Manufacturer Part Number

786324

This is an authentic OEM replacement part.?This flat style over igniter is commonly used in ranges and wall ovens. This igniter is specifically used to ignite the broil element. The igniter pulls current from the ignition circuit, the more current it pulls the hotter the element gets. When it starts to glow and it reaches a certain temperature the gas valve will open and this igniter will create the spark needed to light the gas. When you are installing this replacement part you will need to reuse the original mounting bracket, and you will need a screwdriver. This ignitor is approximately 7.5 inches in length, it is flat in style, it has a 5-1/4-inch ceramic block, and it features 12-inch wire leads. Be careful not to touch the black element as it is very fragile. Before starting this repair make sure you have shut off the gas supply and unplugged the appliance.

Fix Number

FIX4241442

Manufacturer Part Number

DG94-00540A

Fix Number

FIX470131

Manufacturer Part Number

5303935068

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

Fix Number

FIX4241443

Manufacturer Part Number

DG94-00541A

Fix Number

FIX4241464

Manufacturer Part Number

DG94-00633A

This surface burner igniter (part number DG94-00633A) is for ranges. Surface burner igniter DG94-00633A produces the spark that lights the surface burner. Unplug the range and shut off the gas supply before installing this part. Wear work gloves to protect your hands.

Fix Number

FIX16554196

Manufacturer Part Number

DE81-07046A

This hot surface igniter lights the burner by generating the high heat required for clean ignition. A worn igniter may glow weakly, delay ignition, or fail to start the burner entirely. Replacing it ensures fast, reliable ignition and supports efficient, safe heating performance.