Inglis Dryer Drums and Tubs

Two-Piece Split Ring Bearing This is a replacement bearing ring kit for your dryer. The bearing rings are found on the top and bottom lips of the dryer drum. If your dryer is unusually noisy, or the drum will not turn during operation, or if there are marks left on your clothes after a cycle, you may need to replace the bearing ring kit. The kit comes with 2 bearings, one for the top and one for the bottom of the dryer drum. Remove the front panel of your dryer to access the dryer drum for this repair. At this point you can use a pair of needle nose pliers to release the old bearing rings from the drum. Snap the new bearing rings on, and reassemble the dryer to complete your repair.

Drying Rack This dryer drying rack is great for drying shoes and other items that cannot tumble dry. This dryer rack fits dryers that are 29 inches wide, have the letter "E" following the numbers in the model number, and whose dimples are four and a half inches apart in the back of the dryer drum.

Tall Drum Baffle Sold Individually - Appliance originally takes 2.

Drum Front Bearing Ring This part mounts to the front of the drum.

RACK-DRY

Bearing Ring Fits around the front of the drum.

Drying Rack - Dimples 9.5" apart This Whirlpool/Kenmore made dryer drying rack is great for drying shoes and other items that cannot tumble dry. This dryer rack fits whirlpool made dryers that are 29 inches wide, have the letter "E" following the numbers in the model number, and whose dimples are nine and a half inches apart in the back of the dryer drum.

Drum Baffle - Short This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle.

Dryer Drum Baffle The drum baffle lifts and tumbles the clothes inside the drum as the drum rotates during the drying cycle.

RACK-DRY