OEM Midea Dishwasher Parts

Inlet Pipe Assembly

$15.26

Fix Number: FIX18165168
Manufacturer Part Number: 12176000028593

Zone Wash Pipe

$7.60

Fix Number: FIX18165242
Manufacturer Part Number: 12176000033467

Cylindrical Filter

$6.55

Fix Number: FIX18164818
Manufacturer Part Number: 12176000003649

Good water flow depends on a clean dishwasher filter. The cylinder-shaped part traps food and helps keep debris away from the pump and spray system. If dishes stay dirty, inspect the filter, spray arms, and drain area before buying a replacement. Confirm fit with the complete appliance model number. Disconnect power and wait for hot parts to cool. Install the filter in the correct position, lock it securely, and make sure the lower spray arm can turn freely.

Seal

$17.44

Fix Number: FIX18170902
Manufacturer Part Number: 12676000002681

Cracks, hard spots, or torn areas can stop a dishwasher door gasket from sealing well. Food and soap buildup may also leave small gaps that allow water to escape. Clean and inspect the seal before ordering a replacement. Confirm fit with the complete appliance model. Disconnect the power and close the water valve before service. Note how the old gasket sits, install the new one in the same direction, and make sure the corners lie flat before running a test cycle.

Fixes these symptoms

Leaking
See more...

Door Swicth Assembly

$17.44

Fix Number: FIX18189330
Manufacturer Part Number: 17476000012184

When the dishwasher does not sense a closed door, it may refuse to start. A worn door switch can also cause the machine to stop during a wash cycle. Check the latch, strike, and nearby wires before buying a replacement. Use the full dishwasher model number to confirm the correct part. Always disconnect electrical power before removing the inner door panel. If the wires or connectors look burned or damaged, ask a trained technician to inspect the machine.

Fixes these symptoms

Door latch failure
Will Not Start
See more...

Hinge Roller

$7.60

Fix Number: FIX18164921
Manufacturer Part Number: 12176000008784

Smooth door movement depends on the dishwashers hinge and tension parts. Replace the hinge roller if it is cracked, stuck, or badly worn. A damaged roller may cause the door to feel heavy, crooked, or hard to close. Check both sides of the machine before ordering parts. Confirm fit with the complete model number. Turn off power and water, then secure the door before removing any cable or spring. Ask a technician for help if the door cannot be supported safely.