Official Maytag Dishwasher Dishracks

Rack Track Stop

$7.70

Fix Number: FIX11746591
Manufacturer Part Number: WP8565925

This is a single rack track stop clip used to prevent the upper dish rack from sliding all the way out of the dishwasher. It is made of gray plastic and can wear with time. This is an easy repair that should not take very long to complete. Start by opening the dishwasher door, depress the tabs to remove both the front stop clips and remove the upper dish rack from the appliance. Now, using your small flat head screwdriver, release the retaining tab to remove the rear stop track that you are replacing, and pull the clip up to remove it. Install the new clip by inserting it into the support rail from the top and press it down to secure it in place.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Dishwasher Upper Rack Adjuster

$43.81

★★★★★

4 Reviews

Fix Number: FIX11756150
Manufacturer Part Number: WPW10546503

This dishrack adjuster attaches to the side of the top dishrack and fits both the left and ride side. If you are looking to replace both sides, you will need to order 2 of this part, as they are sold separately. It connects to the track, making it possible to move the rack in and out as well as raise up and down to accommodate different size items. If this part breaks, it may make it difficult for the rack to slide in and out with ease, in which case it will need to be replaced, as this can lead to further issues. For this repair, remove the upper rack from the dishwasher, detach the adjuster housing cover and then detach the front and rear adjuster support straps from the tines. Pry off the stop clip to detach the old adjuster. Align the new adjuster on the rack and snap the stop clip in place to secure it. Place the front and rear support straps back on. Position the adjuster housing and place the cover back on to secure. Place the rack back into the dishwasher.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Watch the install video

Tine Pivot

$10.67

★★★★★

3 Reviews

Fix Number: FIX11748190
Manufacturer Part Number: WPW10082853

Having adjustable tines in your dishwasher can be very useful to ensure your dishes are secure during the wash cycle. The Tine Pivot clip helps to keep those moveable tine rows in place on your dish rack. If you notice your dishes are not cleaning properly, it may be that your Tine Pivots are broken or damaged and should be replaced. This part, also called a tine row pivot, is about 3 inches in length, made of plastic, and is found on the top rack of your dishwasher. Replacing the part is an easy job, with no tools required. Ensure you have removed all dishes from the top rack before you begin this repair. Release and lift out the damaged clip, line up the new one along the tines, and snap into place. With the new Tine Pivot in place, your tine rows should stay held in place, ensuring your dishes get cleaned properly. This is a genuine OEM part and is sold individually.

Fixes these symptoms

Not cleaning dishes properly
See more...

Watch the install video

Dishwasher Positioner

$38.21

Fix Number: FIX11750093
Manufacturer Part Number: WPW10195840

The dishwasher positioner clip is also known as a rack adjuster and is used to hold the top rack in your dishwasher in the desired position. If the rack is not staying in place, the clip may have become damaged and should be replaced so that your dishwasher can clean as efficiently as possible. No tools are required for this repair, but you may find a flat blade screwdriver useful for prying off stubborn parts. To replace this part, you will need to take the top rack completely out of the dishwasher, and this will require removing the track stop clips from the ends of the rail. Once the rack is on a suitable work surface, remove the broken clip by releasing the locking tab and install the new one ensuring it clicks into place. The upper rack can now be placed back into the dishwasher, and the track stop clips can be reattached.

Fixes these symptoms

Door latch failure
Door won’t close
Not cleaning dishes properly
See more...

Dishwasher Dish Rack Slide Track - Right Side

$71.74

Fix Number: FIX12584377
Manufacturer Part Number: W11259786

If the upper rack on your dishwasher has become difficult to slide in and out, you may need to replace the slide track. This genuine OEM part is for the right side of your appliance. The left or right side is determined based on facing the machine. If you need to replace both slide tracks, the left-hand one can be purchased separately. The purpose of a slide track is to support the dishrack and helps it open and close easily, so it is important that they are functioning properly. To replace this part, you will need to pull the dishwasher out from under the cabinet to access the screws holding the rails in place. Be sure that you have enough slack in the power and water lines to allow you to pull the appliance out approximately 18 inches, otherwise be sure to disconnect them from the dishwasher.

Fixes these symptoms

Door latch failure
Door won’t close
See more...

Dishwasher Dish Rack Slide Track - Left Side

$84.18

★★★★★

2 Reviews

Fix Number: FIX12584376
Manufacturer Part Number: W11259785

If the dish rack in your dishwasher is no longer sliding in and out easily, it may be time to replace the slide track. This genuine OEM part is used for the left-hand side of your dishwasher dish rack. If you need to replace both tracks, the right-hand one can be ordered separately. In order to replace this part, you will need access to the exterior sides of your dishwasher. This may require you to unscrew the mounting hardware and pull the appliance out from under your countertop. Once you have the dishwasher pulled out you will be able to unscrew the old track and install the new replacement.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Watch the install video

Drawer Track

$49.53

Fix Number: FIX11750072
Manufacturer Part Number: WPW10195623

This is an authentic OEM replacement drawer track for the upper rack of your dishwasher. Also known as a rack slider bar, it helps to support the top rack and allows it to glide in and out of your dishwasher easily. If it has become warped or damaged, it should be replaced as it may prevent your dishrack from operating properly. This part is sold individually, and is interchangeable for the left and right side of the dishwasher. If you need replacement wheels or rack stop clips, those parts can be purchased separately. Replacing this part is an easy repair, and will require a flat blade screwdriver to pop open the rear stop clip. The entire top rack assembly is removed from the dishwasher, the damaged track is replaced with the new one, and then the rear stop clip is reattached and the rack put back in.

Fixes these symptoms

Door latch failure
Door won’t close
See more...

Watch the install video

Lower Dishrack

$254.47

★★★★★

3 Reviews

Fix Number: FIX10057160
Manufacturer Part Number: W10728159

If you need a new lower dishrack for your dishwasher, this is a genuine OEM replacement part. The rack is gray in color and is used to hold your dishes in place while the appliance is operating. Please note that just the rack is included. You can use the rollers and utensil holders from your old rack on the new one.

Watch the install video

Dishwasher Dishrack Adjuster

$46.04

Fix Number: FIX11750092
Manufacturer Part Number: WPW10195839

The dishrack adjuster, also known as an adjuster clip, is used to change the height of the top rack in your dishwasher. If the clip has become damaged, it may not function properly, which would result in your dishrack not staying in the desired position. If this happens, the clips should be replaced. These are genuine OEM replacement rack adjusters, which are sold individually.

Fixes these symptoms

Door latch failure
Door won’t close
See more...

Watch the install video

Silverware Basket

$91.99

★★★★★

2 Reviews

Fix Number: FIX11755312
Manufacturer Part Number: WPW10473836

This is a basket for washing flatware or silverware in your dishwasher. It is 20 Inches and may not fit all models as some require a 19 inch basket (for example model KDTE334DSS0 )

Maytag Dishwasher Dishracks

Popular Maytag Dishwasher Dishracks

Related Maytag Dishwasher Parts

Maytag Dishwasher Dishracks

Start With Your Model Number

Popular Maytag Dishwasher Dishracks

Related Maytag Dishwasher Parts