Gibson Cooktop Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Gibson Appliance Parts
Shop By Appliance Type Shop By Part Type

Popular Gibson Cooktop Parts

Burner Grate – Part Number: 316055800
Burner Grate
$49.39
In Stock
Fix Number
FIX437719
Manufacturer Part Number
316055800
Sold individually.

Installation Instructions

EVELYN from POWAY, CA
old burner grates with no finish left on them
Bought new ones and they fit perfectly and look very nice. Read more...
Surface Indicator Light - 250V – Part Number: 316022503
Surface Indicator Light - 250V
$59.11
In Stock
Fix Number
FIX436963
Manufacturer Part Number
316022503
CONTROL-REGULATOR – Part Number: 5303016997
CONTROL-REGULATOR
$157.95
Special Order
Fix Number
FIX453675
Manufacturer Part Number
5303016997
ROD – Part Number: 3016817
ROD
$30.85
Special Order
Fix Number
FIX433203
Manufacturer Part Number
3016817
SHIELD – Part Number: 3202798
SHIELD
$58.09
Special Order
Fix Number
FIX445932
Manufacturer Part Number
3202798
Surface Burner Coil Element - 8" - 2100W – Part Number: 5308011964
Surface Burner Coil Element - 8" - 2100W
$136.88
In Stock
Fix Number
FIX473948
Manufacturer Part Number
5308011964
Fixes these symptoms
PANEL – Part Number: 5303209945
PANEL
$52.66
Special Order
Fix Number
FIX456212
Manufacturer Part Number
5303209945
Burner Switch Kit – Part Number: 5303935086
Burner Switch Kit
$45.27
In Stock
Fix Number
FIX470145
Manufacturer Part Number
5303935086
This switch controls the stove top surface burner.
Fixes these symptoms

Installation Instructions

Phil from Elkton, OR
8 inch surface element melted at elbow to terminal block - shot out a 6 inch flame.
Note: This is the first time I've ever tried fixing a stove. First, I ordered a new element. Took a minute to install, but it didn't solve the problem. I ordered a terminal block kit and switch kit. Replaced the terminal block. Took about 10 minutes. Only problem was the shrink sleeves melted. Electrician's tape remedied the problem. Tested the element again. It still didn't work. Following instructions provided, replaced the old switch with the new universal switch. First unplugged stove. Removed upper back panel. Took a closeup photo of switch connections, in case I messed up. Removed old switch, leaving all wires connected. Per instructions, mounted new switch and fitted dial to proper length - took about two minutes. Permanently mounted new switch. New switch wire terminals were not in the same location as on the old switch. No matter, both old and new switch terminal designations are clearly marked. Transferred wires from old terminals, one at a time, and connected to corresponding terminal on new switch. Plugged in stove. Turned on the new switch. Element worked fine. Tested the rest of the stove, just to make sure I didn't mess anything up. Everything worked. Replaced back panel. Cleaned up areas on the stove that are hard to reach while stove is in place. Slid stove back in place. Works like a champ. Read more...
BUSHING – Part Number: 318146010
BUSHING
$27.95
In Stock
Fix Number
FIX443802
Manufacturer Part Number
318146010
Watch the install video
Terminal Block Kit – Part Number: 5303935058
Terminal Block Kit
$13.60
In Stock
Fix Number
FIX470125
Manufacturer Part Number
5303935058
This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.
Fixes these symptoms
  • Element will not heat
  • Oven not heating evenly
  • Will Not Start
  • See more...

Installation Instructions

SHIRLEY O from boxborough, MA
burner would not heat
removed burners, cut wires to each burner, installed new wires from terminal block kit. reinstalled surface element. Followed directions from video located at site of the ordered items Read more...

Gibson Cooktop Appliance Types

Related Gibson Cooktop Parts

Popular Gibson Cooktop Models

View More
+