General Electric Cooktop Elements and Burners

Fix Number

FIX2321567

Manufacturer Part Number

WB30T10133

The dual radiant element for your range or cooktop provides the heat that you cook with. It is found under the main cooktop. If your element will not heat, you will need to replace it with this part. This radiant element is 9 inches in diameter and is the larger of the two element sizes on your range. Be sure to disconnect your range from the power source before completing this repair. This radiant element is sold individually.

Fix Number

FIX954107

Manufacturer Part Number

WB28K10222

This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and replace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.

Fix Number

FIX954202

Manufacturer Part Number

WB29K10023

The burner cap is used on your gas range to cover the burner heads. This genuine OEM replacement part is black in color and measures approximately 3 inches in diameter. The purpose of the burner cap is to protect the burner head from spills, and to distribute the flame for an even cooking surface. If the burner caps have become damaged or missing, they should be replaced.

Fix Number

FIX2321564

Manufacturer Part Number

WB30T10130

This is a replacement haliant element for your cooktop or range. It is used with flat top ranges, and is found under the glass top of the range. This element is approximately 12 inches in diameter and is sold individually. The haliant surface element supplies the heat needed to the top of the cooktop. If your burner is not lighting up when it is turned on, you may have an issue with the haliant surface element. Be sure to disconnect power to the range before you begin this repair. To replace the element, remove the screws holding the cooktop in place, then remove it. Then, remove the screws holding the burner in place, disconnect the wires and replace the burner. Replace the cooktop and screw it back in to complete the repair.

Fix Number

FIX2321566

Manufacturer Part Number

WB30T10132

This radiant stovetop element, or burner, is a genuine replacement part, and is 8 inches in diameter. The radiant element heats your cookware as you prepare food on the stovetop. To complete this repair, you will need a screwdriver to remove the screws holding the cooktop in place. Lift the cooktop up, and remove the screw and clip holding the old burner in place. Replace with the new element.

★★★★★

★★★★★

1 Review

Fix Number

FIX954203

Manufacturer Part Number

WB29K10024

If you need new burner caps for your gas range, these are genuine OEM replacement parts. This part is used as a cover for the burner head and helps to distribute the flame. It is black in color and measures approximately 3.5 inches in diameter. Over time and with regular use, the burner caps can discolor or chip. If this happens, they should be replaced. Please note that the burner cap is sold individually.

Fix Number

FIX242972

Manufacturer Part Number

WB2X8228

Also known as receptacle.

Fix Number

FIX243868

Manufacturer Part Number

WB30M2

Fix Number

FIX243867

Manufacturer Part Number

WB30M1

This Y-frame six inch surface burner element has five turns and a metallic center medallion.

Fix Number

FIX1480992

Manufacturer Part Number

WB16T10046

This part is the replacement surface burner head for your gas range. It is silver in color and is approximately 3.5 inches in diameter. This burner is sold individually. The burner head distributes gas to create an even flame across the cooking area. If you notice that your food is not cooking evenly, or you are not getting an evenly distributed flame, you may need to replace the burner. The burner is located beneath the burner cap, below the grate. To remove the burner, simply remove the grate and the burner cap, then lift the burner head out. Replace it with the new burner and reinstall the cap and grate. This is an OEM part sourced directly from the manufacturer.