Part Location Diagram of 314000970 Metabo Anti-Vibration Handle M8
See part 1 in the diagram
( Grid squares measure 1x1 inch )

Anti-Vibration Handle M8 314000970

Rated by 1 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$17.19
In Stock
Fix Number:
FIX10415766
Manufacturer #:
314000970
Manufactured by:
Metabo

Product Description

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Victor from Weston, CO
Parts Used:
344130840, 343373670, 339150880, 316031210, 314000970
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
My angle grinder, after years of hard use made a popping sound and started to vibrate slightly. I noticed some black plastic protruding from one of the motor vent slots in the head of tje grinder. Turned out to be a chunk of the motor cooling fan assembly.
After disconnecting from power, I disassembled the grinder to figure out what was broken, checking all parts as I went along. Disassembly is pretty straight forward, starting by removing the grinding wheel, nut, shield and side handle. Remove the 4 screws and the cover of the bevel gear housing. A 9mm wrench is used to remove the pinion g ear nut, to allow seperation of the motor armature from the gear housing. Before pulling the armature from the handle assembly, you can remove the side covers from the handle assembly and gently pull the brush retainers out of the handle/ motor frame to allow clearance. All parts were fine other than the motor cooling fan that had lost a 5/8" chunk of fin section. The air baffle and cover were still useable but slightly abraded by the fan parts, so I ordered those as well, being inexpensive anyway. The motor brushes were still about 70%, and all bearings were in excellent condition. The only other issue was that the bevel gear lubricant was pretty dried out, so I ordered a tube of that also.
Once my parts arrived I reassembled the grinder- the fan assembly pressed on the armature assembly with hand pressure- just be sure to align the splines. The cover, baffle, and bearing were easily tapped on the motor shaft using a small deep socket to push only on the bearings inner race. The pinion gear then pressed on the same way, then is retained by the 9mm nut. The armature can then be put back into the handle housing, the brush retainers put back in place, and the side covers reinstalled. The bevel gear housing can be pressed onto the armature/ bearing with hand pressure, perhaps with some light tapping with a padded hammer. The gear housing was re- greased with new lube ( it was cleaned while disassembled) and the gear cover/seal/ 4 screws replaced. The wheel guard was a bit tweaked from being used for 15 years, so I straightened that out before replacing it. I purchased an anti- vibe side handle for the old grinder too, as the original plastic handle was getting a bit beat up. In short, a fairly easy and inexpensive repair of an excellent tool. All the parts received from fix.com fit perfectly and were top quality. Hopefully I'll get another 15 years use out of this tool.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX10415766
Manufacturer Part Number: 314000970
Brand
Model Number
Description
Metabo
BHA18
Cordless Drill - 18V Cordless Rotary Hammer
Metabo
BHE20Compact
Hammer Drill - SDS-Plus Shank Rotary Hammer
Metabo
DW10-125QUICK
Air Tool - -
Metabo
DW125QUICK
Air Tool - -
Metabo
KFM18LTX3RF
Beveler - -
Metabo
KFM9-3RF
Beveler - Au 240v
Metabo
RSEV17-125
Miscellaneous - Ch 230v
Metabo
T13-125
Miscellaneous - Eu 230v
Metabo
W10-125Quick
Angle Grinder - 1010W Angle Grinder
Metabo
W10-150Quick
Angle Grinder - 1010W Angle Grinder
Metabo
W1080-125RT
Angle Grinder - Small Angle Grinder
Metabo
W11-125Quick
Angle Grinder - 1100W Angle Grinder
Metabo
W11-150
Angle Grinder - Small Angle Grinder
Metabo
W11-150Quick
Angle Grinder - 1100W Angle Grinder
Metabo
W12-125HD
Angle Grinder - Eu 230v
Metabo
W12-125QUICK
Angle Grinder - Au 240v
Metabo
W12-150QUICK
Angle Grinder - Non Eu 230v
Metabo
W13-125QUICK
Angle Grinder - Ch 230v
Metabo
W13-150QUICK
Angle Grinder - Eu 230v
Metabo
W14-125ERGO
Angle Grinder - Eu 230v
Metabo
W14-150ERGO
Angle Grinder - Eu 230v
Metabo
W17-150
Angle Grinder - Eu 230v
Metabo
W17-180
Angle Grinder - Au 240v
Metabo
W7-115
Angle Grinder - 750W Angle Grinder
Metabo
W7-115Quick
Angle Grinder - 750W Angle Grinder
Metabo
W7-125
Angle Grinder - 750W Angle Grinder
Metabo
W7-125Quick
Angle Grinder - 750W Angle Grinder
Metabo
W8-115
Angle Grinder - 800W Angle Grinder
Metabo
W8-115Quick
Angle Grinder - 800W Angle Grinder
Metabo
W8-125
Angle Grinder - 850W Angle Grinder