Models > WTW7000DW3 > Instructions

WTW7000DW3 Whirlpool - Instructions

Jump to:

All Instructions for the WTW7000DW3
16 - 21 of 21
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from PINE MOUNTAIN, GA
Parts Used:
8212641RP
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Washer hoses due for replacement
Replaced each hose. Did discover that either hose can be used for hot or cold water lines. No longer required to label hot and cold replacement hoses.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephanie from INDEPENDENCE, KY
Parts Used:
W10752187
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
the impellar mechanism wore out so stopped aggitating
Popped the cap , used a socket to unscrew the bolt (it was stripped so ended up having to cut off bolt) Took off old impellar and replaced, installed a new bolt, replaced Cap and it was fixed.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kevin from Tucson, AZ
Parts Used:
WP8563964
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken hinge pin.
Removed broken hinge, replaced with new.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian from DREXEL HILL, PA
Parts Used:
W11244231
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Replace drain hose
At first I had to position the washer so I could get access.. after having it positioned, I figured it out. Getting the clamp fastened, I was done.
2 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
tntsplace.com from MCALLEN, TX
Parts Used:
WP8563964
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Old hinge broke, door did not open and close right.
I removed the screws from old hinge that had broke. The piece came right out with ease. I slid the new hinge in to the hole that it went in. No struggles with ease. Lined up the screw holes and put the screws back in. Finished! Works like a charm.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Carrollton, TX
Parts Used:
WPW10119828, WP8563964
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Hinge pins were sheared off
I removed the screws holding the broken hinges and put the new hinges on. It only took a few minutes.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WTW7000DW3
16 - 21 of 21