PNSF31Z01 General Electric Water Softener - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ben from Seminole, FL
- Parts Used:
- WS60X10004, WS15X10012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench set
by pass was leaking
Turn off the water. Loosen the connections to the pipes with the channel lock pliers. Take the old clips off. Make sure you order new clips, the old ones will break getting them off. Disconnect the overflow hose on top. Pull the old part off. Reassemble in the reverse order. Very easy job. Do not overtighten the connections, you will break them, just snug them up. Check for leaks.
Was this instruction helpful to you?
Thank you for voting!