WTW8540BC0 Whirlpool Washer - Parts

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

11-16 x 3/4 Sold individually.

The drain pump removes water from the washer. Replace if draining issues occur. Unplug the washer before installation.

The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which wi...

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

Washer fill hose gasket and screen. This is a set of 4.

This is the hose that tells your appliance if your tub is at the desired water level.