GHW9100LW2 Whirlpool Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- noemi from lakewood, NJ
- Parts Used:
- WP8182119
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Bellow ripped
Followed video clip that I found online
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sherry from Boca Raton, FL
- Parts Used:
- WP8181846
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The door handle was cracked and needed replaced
I am a 70 year female - went online to order the part - it arrived a day later - it was absolutely a breeze to repair - I unscrewed the old cracked handle in about two minutes and screwed the new one in in about 2 minutes or less. It couldn't have been easier. I was so pleased that I saved time and money and I could do it myself. The cost of the part was much less than I would have paid at Whirlpool and my labor was free. Thank you Parts Select for making the part available.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joanne from Bensalem, PA
- Parts Used:
- WP8182634
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door latch not closing or not releasing
Unplug electric. Open door. Peel rubber bladder back from washer door seal enough to expose wire retension ring. Remove three screws that hold door latch. Remove latch. Remove three wire harnesses. With new latch, reattach wire harnesses. Insert latch. Secure to machine with the three screws. Refit door seal and secure with retension ring. Plug in electric. Done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Casey, IL
- Parts Used:
- WP8181887
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Broken Dispenser & Drawer Handle
Simple Install. Align stubs on handle with slots in dispenser. Snap in place and replace dispenser on rollers.. Took less than 15 minutes and no tools.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOSE from WOODBURN, OR
- Parts Used:
- 280187
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
washer weren't drain
Had to open the panels, remove the old drain pump and install the new one. Remember if there is water still in the hose to either take it out with a wet/dry vacuum or put towels under neither to sook the water. 15 minutes of work and your done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Half moon Bay, CA, CA
- Parts Used:
- 285976
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Warn Out Baffle
I saw a u tube video and followed the presenters instructions. Very simple instruction very simple repair. The whirlpool duet is a well designed machine with the mechanical parts easily accessible. I know if if would have had a professional service come and repair if it would have cost several hundred dollars. It cost me the parts, $50. 00 (That was for the 3-pack of baffles), 1 beer and my time. "Easy fix".
Was this instruction helpful to you?
Thank you for voting!