Models > MWX233MBW0 > Instructions

MWX233MBW0 Tappan Washer - Instructions

Jump to:

All Instructions for the MWX233MBW0
61 - 75 of 76
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
michael from minneapolis, AL
Parts Used:
134511600
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
she would not rattle and roll
I met her in the basement lonely and needing a fix i went down on my knees and started to take off her worn out belt slowly down past her pulley and off her soon to be hot transmision. i gently held her pulleys as i wrapped her new belt around them. putting her chasies back together and plugging her in i pushed her button and off she went shakening and rallting once again.
Was this instruction helpful to you?
Thank you for voting!
Customer:
patrick from northumberland, PA
Parts Used:
3204426, 3204425, 131862900
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
tensioner torn up belt burnt up
removed front cover pushed in tensioner by hand walked belt off pulleys tilted belt removed lock ring pulled tensioner off noticed right rear lower tub brace broke at spot weods drilled out spot welds nut and bolted rear brace put springs back on base and installed belt works like new and saved myself from replacing lower washer tub frame so 70.00 and she up and running again
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MWX233MBW0
61 - 75 of 76