Models > WD11J6410AXFAZ

WD11J6410AXFAZ Samsung Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WD11J6410AXFAZ

Viewing 1 of 1
Part List Diagram and Parts List for Samsung Washer
Part List
Keep searches simple, eg. "belt" or "pump".
Hex Head Bolt – Part Number: DC60-40137A
$13.07
This part is used for the shaft on rear of the tub. Sold individually.
On Order
Tapping Screw – Part Number: 6002-000213
$6.51
In Stock
Order now and your part arrives by May 24
Tapping Screw – Part Number: 6002-000520
$6.51
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
In Stock
Order now and your part arrives by May 24
Tub Bearing – Part Number: 6601-000148
$86.38
In Stock
Order now and your part arrives by May 24
Water Level Pressure Switch – Part Number: DC96-01703G
$88.46
In Stock
Order now and your part arrives by May 24
Hose Connector – Part Number: DC62-00182A
$10.88
In Stock
Order now and your part arrives by May 24
Hex Screw – Part Number: 6009-001522
$8.70
In Stock
Order now and your part arrives by May 24
Hinge Guide – Part Number: DC61-00891A
$56.24
This door hinge guide (part number DC61-00891A) is for dryers. Door hinge guide DC61-00891A holds and supports the door hinge on the front panel. Unplug the dryer before installing this part. Wear wor...
In Stock
Order now and your part arrives by May 24
Self-Tapping Screw – Part Number: DE60-10082I
$24.00
In Stock
Order now and your part arrives by May 24
Motor Assembly – Part Number: DC96-01218E
$314.43
Special Order
Washer Thermistor – Part Number: DC32-00010C
$53.58
This thermistor is for washers. Thermistor monitors and helps regulator the water temperature in the washer. Unplug the washer before installing this part. Wear work gloves to protect your hands.
In Stock
Order now and your part arrives by May 24
Hose Clamper – Part Number: DC65-00008B
$9.79
In Stock
Order now and your part arrives by May 24
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Samuel from NEEDVILLE, TX
Parts Used:
DC60-40137A
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
16 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More