Models > WD10T554DBN/EY > Instructions

WD10T554DBN/EY (0002) Samsung Washer - Instructions

Jump to:

All Instructions for the WD10T554DBN/EY
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Thomas from Leesburg, FL
Parts Used:
DC67-00244A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The drain hose disappeared.
The new hose arrived without a plug, so I found a golf tee that fit securely.
I put a few drops of dish soap on the machine end and it slid on with a little resistance.
I ran a few light cycles, and the leak has stopped.
Thank you
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Samuel from NEEDVILLE, TX
Parts Used:
DC60-40137A
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
16 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WD10T554DBN/EY
1 - 2 of 2