Models > WA52M8650AV

WA52M8650AV Samsung Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Models for WA52M8650AV

Diagrams for WA52M8650AV

Viewing 7 of 0
Keep searches simple, eg. "belt" or "pump".
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues grime and buildup from high-efficiency and top-load washing machines. The tablets work by clea...
Special Order
In Stock
Order now and your part arrives by Sep 8
The suspension rod supports the washer tub and keeps it stable during unbalanced loads. DF10.5@250RPM,K0.41,L715
In Stock
Order now and your part arrives by Sep 8
In Stock
Order now and your part arrives by Sep 8
The thermistor monitors and helps regulator the water temperature in the washer.
On Order
In Stock
Order now and your part arrives by Sep 8
In Stock
Order now and your part arrives by Sep 8
The drain hose carries used water from the washer to your house drain.
In Stock
Order now and your part arrives by Sep 8
In Stock
Order now and your part arrives by Sep 8
In Stock
Order now and your part arrives by Sep 8
The pump coin trap protects the pump from damage by coins or other small objects in the drain water.
On Order
This water-level pressure switch (part number DC96-01703H) is for washers. Water-level pressure switch DC96-01703H senses and controls the water level in the washer. Unplug the washer and shut off the...
In Stock
Order now and your part arrives by Sep 8

Common Problems and Symptoms for WA52M8650AV

Viewing 3 of 3
Leaking
Fixed by these parts
Fixing Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing
How to fix it
Not cleaning dishes properly
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Wai from SAN MATEO, CA
Parts Used:
DC97-18610F
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
washer was unbalance
I call Part Select and spoke with Shawn in March ,2023 ,i told him what the washer had the problem , Shawn explained to me and order 4 Suspension Rod for me , we changed them after received it and works perfect.
I had ordered the part for our refrigerator and another washer before, when we changed the parts , it worked perfect , that is why i order the parts for our appliance when we need from PARTS SELECT

All Representative are very helpful , thank you !
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jahn from Corydon, IN
Parts Used:
DC92-01998C
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Electrical Issue Preventing Washer from Turning On
Repair was very straightforward and simple. As always, unplug first. Remove the two back screws holding on the upper rear cover. Pull the cover towards the rear and up to reveal the main board. Remove the screws holding the main board enclosure (enclosure is basically a large white shroud) and open the cover by gently prying the clips whi le lifting cover. Unplug all input connectors by pinching the tab lightly while pulling the connector off. Install the new board and reverse the steps, plugging in the machine for testing only after reinstalling the cover for safety reasons.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
donald from ROCHESTER, NY
Parts Used:
DC66-00887B
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Pulsator Cap came off during a Wash cycle, it was not usable as part of it was broken
just popped the new one in, it took all of 3 seconds....the worst part was that the part was all Plastic and the replacement part cost close to $70 including Shipping. the part was no bigger than the Cap on a LG bottle of Orange Juice.....Ridiculous..
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!