Models
>
WA45H7000AW
WA45H7000AW (A2-04) Samsung Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WA45H7000AW
Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
This three count package of Affresh Washing Machine Cleaner helps remove odor causing residue from inside the washer, each slow dissolving tablet works throughout the wash cycle and is suitable for al...
Special Order
In Stock
Order now and your part arrives by Sep 20
In Stock
Order now and your part arrives by Sep 20
$112.12
During each drain cycle, the pump must move water out quickly so the washer can continue to spin. Humming, grinding, slow drainage, or repeated stopping may indicate a damaged motor or impeller. Inspe...
In Stock
Order now and your part arrives by Sep 20
On Order
In Stock
Order now and your part arrives by Sep 20
$48.95
The thermistor monitors and helps regulator the water temperature in the washer.
In Stock
Order now and your part arrives by Sep 20
In Stock
Order now and your part arrives by Sep 20
In Stock
Order now and your part arrives by Sep 20
In Stock
Order now and your part arrives by Sep 20
On Order
In Stock
Order now and your part arrives by Sep 20
Common Problems and Symptoms for WA45H7000AW
Viewing 4 of 4Will not drain
Fixed by these parts
How to fix it
Draining Issues
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Not cleaning dishes properly
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Greg from Medina, OH
- Parts Used:
- DC97-19289F
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Top Load washer would not drain to complete spin cycle.
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump,
... Read more
a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump.
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from CENTER HARBOR, NH
- Parts Used:
- DC31-00153A
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Washer stopping in the rinse and spin cycle
Tipped the washer up on a couple of chairs. Pulled the motor apart in three pieces and replaced the Hall Sensor. Error code lead me right to the problem and solution.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alpha from JACKSONVILLE, FL
- Parts Used:
- DC97-19289F
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Washer will not drain
Went to YouTube video and followed instructions.
Hardest part was making sure water from hose does not flood floor while taking it off from water pump and letting water drain in bucket.
See YouTube video
https://youtu.be/oOnxbj-unfc?si=OFFwOcNiIymh_9b-
Hardest part was making sure water from hose does not flood floor while taking it off from water pump and letting water drain in bucket.
See YouTube video
https://youtu.be/oOnxbj-unfc?si=OFFwOcNiIymh_9b-
Was this instruction helpful to you?
Thank you for voting!