Models > WD18H7300KP

WD18H7300KP (PE-0001) Samsung Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$21.82
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order now and your part arrives by Jul 12
This part is used for the shaft on rear of the tub. Sold individually.
In Stock
Order now and your part arrives by Jul 12
In Stock
Order now and your part arrives by Jul 12
In Stock
Order now and your part arrives by Jul 12
Shipping bolts are installed through the back of the washing machine, and hold the wash tub and basket in place while your washer is being transported. The tub suspension holds the tub correctly in pl...
In Stock
Order now and your part arrives by Jul 12
In Stock
Order now and your part arrives by Jul 12
$48.70
On Order
Assembly BOLT;SWF-P12,MOTOR/
In Stock
Order now and your part arrives by Jul 12
$161.83
On Order
The thermistor monitors and helps regulator the water temperature in the washer.
In Stock
Order now and your part arrives by Jul 12
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
In Stock
Order now and your part arrives by Jul 12
In Stock
Order now and your part arrives by Jul 12

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WD18H7300KP

Viewing 1 of 1
Leaking
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Thomas from Leesburg, FL
Parts Used:
DC67-00244A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The drain hose disappeared.
The new hose arrived without a plug, so I found a golf tee that fit securely.
I put a few drops of dish soap on the machine end and it slid on with a little resistance.
I ran a few light cycles, and the leak has stopped.
Thank you
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Samuel from NEEDVILLE, TX
Parts Used:
DC60-40137A
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
16 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!