PAV2300AWW Maytag Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Willie from Pensacola, FL
- Parts Used:
- 12002213
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Would not agitate
Followed video instructions. Most difficult part was re-installing the E-clip on the bearing.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dawn from Franklinton, NC
- Parts Used:
- WP21352320
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Washer would not agitate
Tilt washer back to expose the bottom. Remove broken belt. Install new one. Do a test run: Washer is back to working fine. Note: My boyfriend actually did the repair while I was at work, but reported that I could have done it myself easily. Also: FedEx delivered the part on a Saturday without an extra delivery charge, so my washer was repaired several days sooner than I anticipated. Thanks, PartSelect!
Was this instruction helpful to you?
Thank you for voting!