MHWE950WW01 Maytag Washer - Parts

This hose attaches to water pump assembly. NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.

This hose goes from the drain pump to the back of the washer.

This kit comes with 2 adhesive pads, 2 brackets and 4 screws. This is for stacking the appliances vertically - dryer over washer.

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.

This hose can handle hot or cold water and is five feet long.

This door lock/latch assembly is a genuine OEM part for front-load washers. It keeps the door securely closed during wash and spin cycles, ensuring safe operation. A damaged lock can prevent the washe...

This part attaches to the door and fits into the door lock when the door closes.

This drive pulley attaches to the back of the washers drum.

This is an actuator switch to trigger bleach, detergent, or fabric softener housings to be dispensed into the tub of your washing machine. If your detergent cups are not dispensing, you may need to re...

Keep your washer running smoothly with this suspension spring set, which includes two springs made to steady the outer tub during wash cycles. If your machine has been shaking or making more noise tha...

This kit includes both the upper and lower shipping bolts. 4 in total.