MHWE500VW01 Maytag Washer - Parts

This hose goes from the drain pump to the back of the washer.

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.

This hose can handle hot or cold water and is five feet long.

This part attaches to the door and fits into the door lock when the door closes.

This drive pulley attaches to the back of the washers drum.

This is an actuator switch to trigger bleach, detergent, or fabric softener housings to be dispensed into the tub of your washing machine. If your detergent cups are not dispensing, you may need to re...

Keep your washer running smoothly with this suspension spring set, which includes two springs made to steady the outer tub during wash cycles. If your machine has been shaking or making more noise tha...

This kit includes both the upper and lower shipping bolts. 4 in total.

Sold individually.

Sold Individually. Order quantity needed.

This clamp helps to prevent leaking by holding the end of water hose in place.

Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.