MHW8000AG0 Maytag Washer - Parts

This part attaches to the door and fits into the door lock when the door closes.

This is an actuator switch to trigger bleach, detergent, or fabric softener housings to be dispensed into the tub of your washing machine. If your detergent cups are not dispensing, you may need to re...

The door boot spring clamp holds the door boot in place.

This water inlet valve controls water flow into the washer. Verify compatibility before ordering. Always unplug the washer and shut off the water before installation.

This clamp helps to prevent leaking by holding the end of water hose in place.

This stacking kit allows compatible front-load washer and dryer models to be stacked vertically. It is designed to maximize laundry space and can be used on various models. Please use your model numbe...

This part is usually located in the bottom of the washer next to the drive motor. It is used to control the drive motor speed as well as the direction for the spin and tumble actions during the cycle.

This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (Fix Number FIX334663) to connect the extension to the existing drain hose.