MAV6300AGW Maytag Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Louis from FREMONT, NE
- Parts Used:
- 12002213
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
it was spinning slowly or not at all
I first changed the belt which helped but it still sounded like it was going to take off through the roof.....I did the pulley and bearing kit in hopes that it would do some good....it went really smoothly with no issues however it did not solve the problem....so it is working and I am going to just ride it out until it quits....thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Isabel from RIVERSIDE, CA
- Parts Used:
- W10814230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lid switch broke in half
I watched video, couldn’t believe how easy to replace
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from VAN WERT, OH
- Parts Used:
- WP22002751
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken hinge pin
After receiving the new part, I lifted the lid making sure it was level, then simply pushing the new pin in the lid hole, then pushing the whole thing back toward the corner of the lid until it clicked in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Mount Vernon, WA
- Parts Used:
- WP35-6780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
The water pump was making a horrible grinding sound
The repair was a piece of cake! I actually stumbled upon PartSelect by searching for the part, it happened to be that the part through your company was the cheapest! Not only did that make me and my wallet happy the part came fast and i was able to repair the washer in 15-30 mins!! Thank you PartSelect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christal from CASA GRANDE, AZ
- Parts Used:
- WP22002751
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Washer lid would not close causing the cycles to not work
Used a simple screw driver to push in the lid part...sooooooo simple!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from Hollywood, FL
- Parts Used:
- WP35-6780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Pulley Insert Coming Out Of Pully Hitting Housing
Replaced pump because pulley did not come off pump without breaking pump in half.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Wading River, NY
- Parts Used:
- WP21002026
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Socket set
noisy out of balance during spin cycles
I followed the instructions that other posters suggested. The springs were the toughest part to remove and reinstall. Having my wife push the tub enabled me to use vice grips to get them back on. Read about the coins or washers to spread the springs too late... would have helped. Running a wash now and it's spinning great and no noise!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Julio from Oviedo, FL
- Parts Used:
- WP35-6780, WP22002239
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Bad Water Pump and clip holding front panel
Replacing the water pump only required the removal of the front Panel, removing and replacing the pump with socket set and then installing front panel with the new clip. Once this was complete the belt drive was installed on the bottom of the washer. Very easy fix.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doreen from Seaford, NY
- Parts Used:
- WP21001905
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dispenser did not come with maching
All I had to do was take off the white cap on top of the spinner, place the dispenser cup in the hole and it was done! It works great even though there was no indication that my model would work with a dispenser. It was the best $3.95 I ever took a chance on!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Hollee from Rancho Mirage, CA
- Parts Used:
- WP21002026
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Washer making loud noise and tub off balance
I followed Gary from Sioux City IA instructions. Very well explained.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Curt from Whittier, CA
- Parts Used:
- WP21001905
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Fabric softener lent on washed clothing
I pried up the fabric sotener cover on top of the spindle with a screwdriver and removed it and softner cup holder-it twisted off. I then replaced entire softener unit which I had ordered.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from Yorba Linda, CA
- Parts Used:
- WP35-6780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
Washing Machine Noisy due to Corrugated Metal Spacer
After looking at some of the other stories, I realized this was going to be a super easy fix. I moved the washer away from the wall, disconnected all the lines and then removed the pump. Seriously it took about 20 minutes start to finish, and now the washing machine sounds brand new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Curt from Warner, NH
- Parts Used:
- WP35-6780
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
Shrieking noise from washer, then motor seized.
I followed all the instructions from your site. It was very easy. Hardest part was the hose clamps. So it was very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Rock Hill, SC
- Parts Used:
- WP21002026
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Washer going out of balance
Tilted washer back and removed belt
Lifted front of top and propped up
Unscrewed two screws and removed front of washer
Disconnected two drain lines from tub
Disconnected 6 springs from tub
Removed tub
Popped off bottom plastic cap
Removed locking ring
Slid off gear from shaft
Unbolted screws from snubber support ring
replaced snubber
Put everything back together in reverse order
Worked like a champ!!!!!
Lifted front of top and propped up
Unscrewed two screws and removed front of washer
Disconnected two drain lines from tub
Disconnected 6 springs from tub
Removed tub
Popped off bottom plastic cap
Removed locking ring
Slid off gear from shaft
Unbolted screws from snubber support ring
replaced snubber
Put everything back together in reverse order
Worked like a champ!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ira from Hollywood, FL
- Parts Used:
- WP35-6780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench set
Water pump seized up. Pulley ruined gear at bottom
Replaced pump. Works great!
Was this instruction helpful to you?
Thank you for voting!