MAV7557EWW Maytag Washer - Parts

This suspension spring is used with many washing machines. It is made entirely of metal and is seven inches long.

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. NOTE: This is a redesigned part. The pump now mounts on to the b...

This snubber ring fits washers and is located between the leg and dome assembly. The ring has a diameter of 9 inches. It is used to reduce noise and vibration for stability when the washer is operatin...

Also known as Thrust Bearing Kit. This kit includes the pulley, washer, thrust bearing, 2 upper race washers and 1 lower race washer. These parts are NOT available separately - they are ONLY availab...

This washing machine drive belt is used with some clothes washers. This belt is all black in color and is made entirely of rubber.

This motor is a 2 speed, 1/2 HP, 120V, 60Hz.

This is a replacement lid switch actuating cam for your washer. The cam is located on the underside of the washer lid, near the hinge. The cam actuates the lid switch, so your washer knows the lid is ...

This hose clamp is sold individually.

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.

This lid hinge pin is almost two inches long. It is all white in color and is made of plastic.

This part is the replacement motor pivot spring for your washer. It is made of metal and is approximately 3 inches long and 2 inches wide. The motor pivot spring helps hold the drive motor in the corr...