LAT2300AWW Maytag Washer - Parts

This timer knob spring is almost an inch and a half long, and is not quite an inch in diameter. It is made of metal and is used with the timer knobs of both washers and dryers.

This inner tub clamping nut is just under three inches in diameter, and is made of metal. It has a reverse thread and screws onto the mounting stem.

12-14 X 5/8. Sold individually. Your appliance will most likely require 4.

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This lid switch actuator spring is exactly one inch long. It is made of metal.

This screw is sold individually.

May not be exactly as shown.

This center seal retaining washer is a little over an inch in diameter. It is made of metal.

This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.

This two speed split phase washing machine motor performs 1725 revolutions per minute in one speed and 1140 revolutions per minute in the other speed. This motor runs at 1/2 horsepower and it carries ...