A15CT Maytag Washer - Parts

This hose connects the washer tub to the drain pump, allowing water to flow out during the drain cycle. It’s a durable replacement for a cracked or clogged hose and helps prevent leaks and drainage issues.

This inner tub clamping nut is just under three inches in diameter, and is made of metal. It has a reverse thread and screws onto the mounting stem.

This outer tub clamp seal is sixty-eight inches long. It is black and made of rubber.

12-14 X 5/8. Sold individually. Your appliance will most likely require 4.

This shaft seal comes filled with grease on the inside, and is used for washing machines.

This lid switch actuator spring is exactly one inch long. It is made of metal.

This screw is sold individually.

This screw is sold individually. Size: 8-32 x 1/4 inch.

This center seal retaining washer is a little over an inch in diameter. It is made of metal.

This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.