A202 Maytag Washer - Parts

This hose connects the washer tub to the drain pump, allowing water to flow out during the drain cycle. It’s a durable replacement for a cracked or clogged hose and helps prevent leaks and drainage issues.

This timer knob spring is almost an inch and a half long, and is not quite an inch in diameter. It is made of metal and is used with the timer knobs of both washers and dryers.

This inner tub clamping nut is just under three inches in diameter, and is made of metal. It has a reverse thread and screws onto the mounting stem.

This outer tub clamp seal is sixty-eight inches long. It is black and made of rubber.

This shaft seal comes filled with grease on the inside, and is used for washing machines.

This screw is sold individually.

This center seal retaining washer is a little over an inch in diameter. It is made of metal.

This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.

This two speed split phase washing machine motor performs 1725 revolutions per minute in one speed and 1140 revolutions per minute in the other speed. This motor runs at 1/2 horsepower and it carries ...

This clamp does include the nuts and bolts to hold it together but it does not include the rubber seal. Sold separately.

This is an outer tub bolt and gasket.