The door strike plays a vital role in your top-load washer’s safety system by securing the lid during each cycle. It works with the latch to prevent the door from opening unexpectedly, helping avoid w...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer isn’t filling properly or is leaking near the back, this inlet valve might be the problem. It controls how hot and cold water enter your machine during the wash cycle. With two inlets a...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
This lid lock assembly for top-load washers includes the solenoid mechanism that engages the locking function during wash and spin cycles. It serves as a direct replacement for older or damaged latche...
This clutch slider kit is part of the washer’s transmission system, helping control the agitator’s speed and direction during wash and spin cycles. It includes the clutch band, slider, and lock ring. ...
In Stock
Order now and your part arrives by Mar 16
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Trisha
June 29, 2022
When starting cycle, after sensing, the agitator loves for a second then says wash complete. This happens within one minute. No code is thrown. We are already determined nothing is stuck or clogged.
For model number MVW7232HW0
Hello Trisha, thank you for your question. We recommend replacing the User Interface PS16221059. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mirko
November 8, 2022
When you press power button won’t get power
For model number MVW7232HW0
Hello Mirko, thank you for contacting us. We would recommend checking the lid lock switch, part number FIX12730859, and switch, part number FIX12348295. If this does not help, the electronic control board, part number FIX12745529, is probably faulty. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
My washer senses on every cycle for about a minute then doesn't do anything and says cycle complete. Lid locks and bottom agitates but no water or anything else.
For model number MVW7232HW0
Hi Katie, thank you for your query. To fix this issue, you may need to check the following parts: the water inlet valve, part number FIX12348013, and the control board, part number FIX12745529. We have attached relevant links to help you check these parts. We hope this solves your problem!
When you start the washer it goes into sensing mode and then says washing complete Immediately, , And then nothing else happens. Can you please tell me what's wrong with it?
For model number MVW7232HW0
Hello Heather, thank you for reaching out to Fix. Based on our understanding of the issue, we would recommend checking the touchpad and control panel, part number FIX16221059. It processes the cycle settings. We hope this solves your problem!
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
