Models > WM3570HVA

WM3570HVA (00) LG Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WM3570HVA

Viewing 3 of 3
Control Panel Parts Diagram and Parts List for 00 LG Washer
Control Panel Parts
Dispenser Assembly Parts Diagram and Parts List for 00 LG Washer
Dispenser Assembly Parts
Drum And Tub Assembly Parts Diagram and Parts List for 00 LG Washer
Drum And Tub Assembly Parts
Keep searches simple, eg. "belt" or "pump".
Water Inlet Valve - Hot – Part Number: 5220FR2006H
$26.80
The hot water valve is found at the back of your washer and controls the flow of hot water into the machine. If the valve is defective, the washer may leak, overfill, fill slowly, or not fill with wat...
In Stock
Order within the next 8 hrs and your part ships today!
Water Inlet Valve - Cold – Part Number: 5220FR2075L
$72.90
If your washing machine is leaking, slow to fill, will not stop filling with water, or is not filling at all, the cold-water inlet valve may be defective. The purpose of the valve is to open to allow ...
In Stock
Order within the next 8 hrs and your part ships today!
Tub-to-Pump Drain Hose – Part Number: 4738ER1002A
$41.72
This hose has bellows to allow for flexibility during the wash and spin cycles.
In Stock
Order within the next 8 hrs and your part ships today!
SENSOR ASSEMBLY – Part Number: 6501KW2002B
$41.72
This is a replacement sensor assembly for your washer. It may also be known as a motor rotor position sensor. The sensor assembly monitors the direction and speed of the spinning rotor and communicate...
In Stock
Order within the next 8 hrs and your part ships today!
Detergent Dispenser – Part Number: 3891ER2003A
$27.79
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is brok...
In Stock
Order within the next 8 hrs and your part ships today!
Washer Hose with Bellows – Part Number: 4738ER1004B
$31.32
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
In Stock
Order within the next 8 hrs and your part ships today!
Door Boot Seal – Part Number: MDS47123602
$116.67
This door boot is for washers. Door boot forms a seal between the wash tub and the door, preventing leaks. Unplug the washer before installing this part. Wear work gloves to protect your hands.
In Stock
Order within the next 8 hrs and your part ships today!
Hose Assembly,Drain – Part Number: 5215ER2002G
$50.45
In Stock
Order within the next 8 hrs and your part ships today!
DAMPER ASSEMBLY,FRICTION – Part Number: ACV72909503
$41.87
In Stock
Order within the next 8 hrs and your part ships today!
Gasket – Part Number: MDS62058301
$30.78
This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tu...
In Stock
Order within the next 8 hrs and your part ships today!
Clamp Assembly – Part Number: ACA56078801
$20.84
In Stock
Order within the next 8 hrs and your part ships today!
Bellow - Gray – Part Number: MDS47123605
$139.92
In Stock
Order within the next 8 hrs and your part ships today!
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WM3570HVA

Viewing 10 of 10
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Does not dispense fabric softener or detergent
Fixed by these parts
Fixing
How to fix it
Will not agitate
Fixed by these parts
Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
No hot or cold water
Fixed by these parts
Fixing
How to fix it
Spinning Issues
Fixed by these parts
Fixing
How to fix it
Spins slowly
Fixed by these parts
Fixing
How to fix it
Lid or door won’t close
Fixed by these parts
Fixing
How to fix it
Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Cold

Replacing the Water Inlet Valve - Cold

Replacing the Tub-to-Pump Drain Hose

Replacing the Tub-to-Pump Drain Hose

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mark from Harrisburg, PA
Parts Used:
6501KW2002B
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
LE Error Message and won't spin drum properly
I first tested the motor per the service manual. I checked the resistance between the terminals of the 3 pin connector. It's supposed to be 5-15 ohms. The motor checked out so I replaced the main electrical board. It turns out that wasn't the problem. After a brief web search I found out that the hall sensor (which is attached to the motor stator) was the likely cause of the failure. I replaced that and everything works great now. And now I have a spare main board in case that ever fails. I also want to mention that I took the time to remove the dispenser box (where the water comes in and is directed to the different cleaning products) and cleaned it with a very strong bleach solution. It got rid of the mildew and funky smell. It seems that the fabric softener caused a lot of mildew to form inside the dispenser directly above the fabric softener tray. The bleach took care of that. This is probably something that should be done routinely to keep the mildew from forming.
Read less
235 of 307 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leslie from STOWE, VT
Parts Used:
4738ER1002A
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
leaking tub-to-pump drain hose
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
46 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Northport, NY
Parts Used:
5220FR2075L
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Inlet valve leak
Followed directions on the video and went like a charm. Very impressed with service and video
34 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More