WM2487WHM LG Washer - Parts
Jump to:
Keep searches simple, eg. "belt" or "pump".
$144.05
Cold water is directed through this washer inlet valve to supply the tub and dispenser during selected cycle stages. Four solenoid coils control separate outlets, opening when the washer requests wate...
In Stock
Order now and your part arrives by Nov 22
$276.32
This rear drum support, also known as a spider or spinner support, is a critical structural component in select washing machines. Featuring a triangular design with three metal arms, it securely holds...
In Stock
Order now and your part arrives by Nov 22
$38.45
The removable filter and cap assembly provides access for routine cleaning and seals the filter opening when tightened. Replace the damaged assembly to restore the debris trap and sealed access point....
In Stock
Order now and your part arrives by Nov 22
$57.30
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
On Order
$80.25
Smooth, quiet drum movement relies on this washer tub ball bearing. Mounted at the back of the outer tub, it supports the inner drum shaft and reduces friction during wash and spin cycles. This OEM pa...
In Stock
Order now and your part arrives by Nov 22
In Stock
Order now and your part arrives by Nov 22
$26.19
The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.
Special Order
$32.95
Spring tension holds the washer door boot securely against the front panel with this metal retaining clamp assembly. The ring fits around the flexible rubber seal, helping keep its outer edge seated d...
In Stock
Order now and your part arrives by Nov 22
$121.86
A watertight barrier around the opening in the door keeps wash water inside the machine. This gray front-loading washer door boot gasket connects the outer tub to the front panel, with flexible folds ...
In Stock
Order now and your part arrives by Nov 22
In Stock
Order now and your part arrives by Nov 22
$16.45
This hose clamp applies pressure around the hose end, holding it firmly against its fitting during operation. A secure hose connection helps keep water contained inside the appliance. This OEM part is...
In Stock
Order now and your part arrives by Nov 22
$23.05
Drain residual water before cleaning the pump filter with this washer cleanout hose. The flexible rubber hose attaches to the drain pump filter housing, giving remaining water a controlled outlet from...
In Stock
Order now and your part arrives by Nov 22